Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ 4.6 Diffs

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Nor
Posts: 44
Joined: Thu Apr 10, 2003 9:41 pm
Location: Lebanon

GQ 4.6 Diffs

Post by Nor »

I would like to get some feedback about 4.6 diffs.

I found a local parts dealer, who's not very bright, so I'd have to check out the diffs he has, and determine which one is a 4.6 and if it's good or no.

Can anyone give me details on where and what to look for?


Thnx!
Best Regards,
Owner & Driver of:
"The Green Youpala,
Official LR recovery Vehicle"
(Patrol GQ 94' LWB, 2" OME Sus Lift,5 link front,35" MT/Rs,Warn M8274-50,Custom Bull Bar,2" BL ---> 4.6 front and rear diffs on the way)
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ 4.6 Diffs

Post by bogged »

Nor wrote:I would like to get some feedback about 4.6 diffs.

I found a local parts dealer, who's not very bright, so I'd have to check out the diffs he has, and determine which one is a 4.6 and if it's good or no.

Can anyone give me details on where and what to look for?
Thnx!



In Australia, they are marked on the compliance plate on the firewall what ratios are in that car. HG46 should be 4.6's

Look for wear on teh gears.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

I think what he wants is if the diff center is out of the vehicle in front of you how do you tell the difference between a 4.6 and a 4.11 or a 3.9 do the centers have any markings or are there numbers stamped on the crown wheel that you could see
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

count the pinion teeth and crownwheel teeth and divide. eg 41 c/wheel and 9 pinion = 4.555
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

gq/gu 4.6 has 37 crownwheel and 8 pinion teeth.
navara has 51 cw and 11 p.
shane
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Just reading some other topics at the same time. I have GQ ute, can I get 4.6 ratios 2nd hand or do I have to go aftermarket?
Top
User avatar
Nor
Posts: 44
Joined: Thu Apr 10, 2003 9:41 pm
Location: Lebanon

Post by Nor »

Thanx alot guys.

1 more question.

My rear diff is a 3.9 LSD (limited slip) with an in-cab electrical switch to activate the lock.

If I get the 4.6 R&P, can I fit it into the same shell and use the LS locking system?
Best Regards,
Owner & Driver of:
"The Green Youpala,
Official LR recovery Vehicle"
(Patrol GQ 94' LWB, 2" OME Sus Lift,5 link front,35" MT/Rs,Warn M8274-50,Custom Bull Bar,2" BL ---> 4.6 front and rear diffs on the way)
Top
Posts: 131
Joined: Fri Nov 07, 2003 11:59 am
Location: Fraser Coast Qld

Contact:
Contact Tailspin

Post by Tailspin »

Try looking at Diff centres out of a 2.8 Turbo Patrol, you will find they are 4.6. Or try 4wd systems in South Australia.
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Tailspin, i think the whole problem is that he is i lebanon!!!
Land Rover Discovery - GQ conversion underway
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

4wd system do the mail order type of stuff too, similar way they do the mail order brides from what ive been told
Top
Posts: 131
Joined: Fri Nov 07, 2003 11:59 am
Location: Fraser Coast Qld

Contact:
Contact Tailspin

Post by Tailspin »

Rather the mail order lokka :lol:
Top
Posts: 127
Joined: Mon Jul 21, 2003 6:56 pm
Location: Bucharest, Romania, Europe

Post by Gabriel »

Hi,

The 4,625 diffs are mounted in GQ RD28T engine. On the crown side there is stamped the gear ratio.
Use only the pair: crown and pinion, not separate ones...
It fits on H233 axles.
I was on the way to sell mines as I changed it for 5.1, but since I own a TD42 LWB, I keept it, maybe I will change it to the TD42 (I run 33 BFG AT at the moment..).

Best regards to all of you, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Gabriel wrote:Hi,

The 4,625 diffs are mounted in GQ RD28T engine. On the crown side there is stamped the gear ratio.
Use only the pair: crown and pinion, not separate ones...
It fits on H233 axles.
I was on the way to sell mines as I changed it for 5.1, but since I own a TD42 LWB, I keept it, maybe I will change it to the TD42 (I run 33 BFG AT at the moment..).

Best regards to all of you, Gabriel


I want 4.6s :(
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

bogged wrote:
Gabriel wrote:Hi,

The 4,625 diffs are mounted in GQ RD28T engine. On the crown side there is stamped the gear ratio.
Use only the pair: crown and pinion, not separate ones...
It fits on H233 axles.
I was on the way to sell mines as I changed it for 5.1, but since I own a TD42 LWB, I keept it, maybe I will change it to the TD42 (I run 33 BFG AT at the moment..).

Best regards to all of you, Gabriel


I want 4.6s :(


Don't we all!!!!!!!!!!!!!!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:Don't we all!!!!!!!!!!!!!!


Gab has a flood of them over there though :(
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Ive got a set out of a gu :D any bids ;)
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

A1MAV wrote:Ive got a set out of a gu :D any bids ;)


Well just did some Internet Banking and going by the statment, best I can do this week is the stale mars bar that got lost under the drivers seat 6mths ago (ps the air compressor is next to and it is pushed up against the trans tunnel with no carpet - so maybe melted abit).
But just for interest sake what sort of coin are you thinking of for them.

Turps
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:But just for interest sake what sort of coin are you thinking of for them.


He phuked up, they dont fit the GQ! THats why hes sellin' them! :armsup: :armsup: :armsup:
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

bogged wrote:I want 4.6s :(


I got em.... cost me a set of 4.1s :lol:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

getdirty wrote:
bogged wrote:I want 4.6s :(


I got em.... cost me a set of 4.1s :lol:


I'll swap you a set of 4.1's and a slab for em...
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

did you honestly expect me to repond with anything but NO....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

getdirty wrote:did you honestly expect me to repond with anything but NO....


it would be a profit for you... I'll throw in a rose... :D
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

I'll throw in a :finger: then...... :lol:
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

you could always buy the car, change gears then sell it.........
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

getdirty wrote:you could always buy the car, change gears then sell it.........


If you take $10 its a deal....
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

bogged wrote:If you take $21,000 its a deal....


hmmmm i'll think about it.....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

getdirty wrote:
bogged wrote:If you take $21,000 its a deal....


hmmmm i'm dreaming of that much...



I'd say so! :armsup: :finger: :armsup:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 65 guests