Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CASTOR PLATES BREAKING ????????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 63
Joined: Wed Mar 15, 2006 6:36 pm
Location: Brisbane-- Jimboomba

CASTOR PLATES BREAKING ????????

Post by lewy »

Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.

Thanks Steve :D
03 STL GU 4.2Tdi
Because reliability counts!! [size=150][/size]
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have had 80 series standard mounts crack an also standard gq mounts crack but not caster plates, the mounts normally crack at the diff
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

Ive had caster plates for over 2 years and they have had a fair hiding. Still in perfect condition .......cheers shane.
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Re: CASTOR PLATES BREAKING ????????

Post by rOd »

lewy wrote:Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.

Thanks Steve :D
Im guessing that the axle has not been centered with the correct panhard length to match the lift.
Dont expect mere proof to sway my opinion.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Re: CASTOR PLATES BREAKING ????????

Post by nastytroll »

rOd wrote:
lewy wrote:Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.

Thanks Steve :D
Im guessing that the axle has not been centered with the correct panhard length to match the lift.
All had the right length panhards, gq n series 1 gu left hand inner plates are not fully welded and crack the small stitch welds there, the rest seem OK. The 80 series had a 3" lift and its common for them to crack their mounts. When flexed alot the plates get work harden and crack at the first ridgid point, the diff housing. I have repaired quite a few of these.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 15 guests