Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.
Thanks Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
CASTOR PLATES BREAKING ????????
Moderators: toaddog, TWISTY, V8Patrol, Moderators
CASTOR PLATES BREAKING ????????
03 STL GU 4.2Tdi
Because reliability counts!! [size=150][/size]
Because reliability counts!! [size=150][/size]
Re: CASTOR PLATES BREAKING ????????
Im guessing that the axle has not been centered with the correct panhard length to match the lift.lewy wrote:Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.
Thanks Steve
Dont expect mere proof to sway my opinion.
Re: CASTOR PLATES BREAKING ????????
All had the right length panhards, gq n series 1 gu left hand inner plates are not fully welded and crack the small stitch welds there, the rest seem OK. The 80 series had a 3" lift and its common for them to crack their mounts. When flexed alot the plates get work harden and crack at the first ridgid point, the diff housing. I have repaired quite a few of these.rOd wrote:Im guessing that the axle has not been centered with the correct panhard length to match the lift.lewy wrote:Gday all i have heard of people saying that caster plates can just snap or brake.
Has any one had this happen to them or heard of it happening??.
I just don't c it being possible anyway just thought i should ask.
Thanks Steve
Who is online
Users browsing this forum: No registered users and 0 guests