Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

reco 2H

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

reco 2H

Post by Nat84 »

hi guys just thinking about recoing my 2h (1983 HJ60 landcruiser) and would like to know roughly what would it cost if i do all the work apart from the machineing of the block and full reco head

Nat
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

I've seen full rebuild kits on eBay for $800ish. Injector pump would add a bit.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

joel HJ60 wrote:I've seen full rebuild kits on eBay for $800ish. Injector pump would add a bit.
yep seen them...injector pump will have to wait as all i have is 2g ( i hope)
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Posts: 94
Joined: Fri Aug 13, 2004 3:38 pm
Location: Derby, Western Australia

Post by Sweeney »

Factor around $60 per injector for new pintles and spray pattern check.
For around $400-500, you get the injector pump checked (pump volume and condition) and new seals for vacuum advance/throttle setup. This is not a complete pump rebuild though but it is better than nothing.
Are you doing this yourself?

Hope this helps
AWD is a poor excuse for a 4WD.
Post Reply

Who is online

Users browsing this forum: No registered users and 71 guests