hi guys just thinking about recoing my 2h (1983 HJ60 landcruiser) and would like to know roughly what would it cost if i do all the work apart from the machineing of the block and full reco head
Nat
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
reco 2H
Moderators: toaddog, Elmo, DUDELUX
Factor around $60 per injector for new pintles and spray pattern check.
For around $400-500, you get the injector pump checked (pump volume and condition) and new seals for vacuum advance/throttle setup. This is not a complete pump rebuild though but it is better than nothing.
Are you doing this yourself?
Hope this helps
For around $400-500, you get the injector pump checked (pump volume and condition) and new seals for vacuum advance/throttle setup. This is not a complete pump rebuild though but it is better than nothing.
Are you doing this yourself?
Hope this helps
AWD is a poor excuse for a 4WD.
Who is online
Users browsing this forum: No registered users and 8 guests