Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LJ70 Bundera Transfer
Moderators: toaddog, Elmo, DUDELUX
LJ70 Bundera Transfer
I am wondering if a landcruiser Transfer Case can be used in a LJ70 Bundera and the vacuum engage system transfered over? as I have a major crack in mine and tracking down one is quite hard as they are rare as hens teeth
Before All toys there was the Landcruiser
They are the same transfer. You can use one from a mid wheel base landcruiser or even any from the early 70 series cruisers. However your internals may be slightly different as far as inputs are concerned. The LJ70 has the best transfer ratio of all of them. Don't be put off from tracking them down they are still fairly common but there is a lot of mis information out there as far as bunderas are concerned, best of luck
Who is online
Users browsing this forum: No registered users and 5 guests