Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LJ70 Bundera Transfer

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

LJ70 Bundera Transfer

Post by BundyMonkey »

I am wondering if a landcruiser Transfer Case can be used in a LJ70 Bundera and the vacuum engage system transfered over? as I have a major crack in mine and tracking down one is quite hard as they are rare as hens teeth
Before All toys there was the Landcruiser
Posts: 23
Joined: Wed Mar 22, 2006 7:37 pm
Location: SE Suburbs Melbourne

Post by tonkatuf »

I had a look at the difference between my fj73 and my mates Bundy (both with the vacuum engage) and the transfer cases look identical on the outside prob just a different housing at the front of the case.
Posts: 56
Joined: Thu Jan 19, 2006 3:50 am
Location: Finland

Post by Axel Von Gardan »

If you want to change non-vacuumed case, then old HJ60 whole transfer case is your choice, gear ratio and middle axles size is bit different than LJ70 transfer case, but all those can be modified to fit.
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

They are the same transfer. You can use one from a mid wheel base landcruiser or even any from the early 70 series cruisers. However your internals may be slightly different as far as inputs are concerned. The LJ70 has the best transfer ratio of all of them. Don't be put off from tracking them down they are still fairly common but there is a lot of mis information out there as far as bunderas are concerned, best of luck
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests