Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
detom cam
Moderator: Tiny
detom cam
anyone used one on the rocky/feroza ?
Yes - if you like to rev hard 4k+ then its an option, but you suffer down the rev range.
Also the Detom has electronic timing control and a knock sensor so getting the tune right is harder in a Feroza.
I have specs if your interested.
Also the Detom has electronic timing control and a knock sensor so getting the tune right is harder in a Feroza.
I have specs if your interested.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Applause HD-E cam specs :
Exh 43°/1° 224° 0.310" 0.012"
In 2°/48° 230° 0.327" 0.01"
rocker ratio 1.5
Detomaso HD-EG cam specs :
Exh 52°/8° 240° 0.310" 0.012"
In 8°/52° 240° 0.325" 0.01"
rocker ratio 1.5
This means stuff to cam grinders.......
Exh 43°/1° 224° 0.310" 0.012"
In 2°/48° 230° 0.327" 0.01"
rocker ratio 1.5
Detomaso HD-EG cam specs :
Exh 52°/8° 240° 0.310" 0.012"
In 8°/52° 240° 0.325" 0.01"
rocker ratio 1.5
This means stuff to cam grinders.......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
MightyMouse wrote: This means stuff to cam grinders.......
I think it makes them feel important!http://www.tighecams.com.au/profiles2/daihdith16v.htm
David
With standard gearing and larger tyres its damm hard to really notice much difference between stock cams and the "torque" cams in off road use.
If you go for a hottie they are hopeless down low but once you get to around 4k+ then you notice the difference
I have run a stock Feroza, HD-C, HD-E a "torque" cam and a HD-EG cam. Truth to tell the only one that was obviously different was the EG cam but not suitable.
Advancing the stock cam seemed to work best for me but this isn't easy to do even with engineering facilities and even then its time consuming.
Have got the ECU out at the moment and am investigating whether there's any performance to be had out of it... not hopeful but as I have the facilities and contacts its worth a try.
IMO its like most things Feroza - there are small gains available but you have to work hard to get them.
If you go for a hottie they are hopeless down low but once you get to around 4k+ then you notice the difference
I have run a stock Feroza, HD-C, HD-E a "torque" cam and a HD-EG cam. Truth to tell the only one that was obviously different was the EG cam but not suitable.
Advancing the stock cam seemed to work best for me but this isn't easy to do even with engineering facilities and even then its time consuming.
Have got the ECU out at the moment and am investigating whether there's any performance to be had out of it... not hopeful but as I have the facilities and contacts its worth a try.
IMO its like most things Feroza - there are small gains available but you have to work hard to get them.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 14 guests