Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winch shaft

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Contact:
Contact WelchyGQ

winch shaft

Post by WelchyGQ »

need to know where i can get a hi mount shaft already drilled and taped in the end and how much?

have exchange shaft if it would make it cheaper.

Need ASAP

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

i think giant racing does it up your way or mal leslie
innovation is better, better is faster, and fast is all that counts
Top
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Contact:
Contact WelchyGQ

Post by WelchyGQ »

hammey,

do you have contact details for either?

welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

giantracing mbl 0438279890 or pm him

cheers smitty
innovation is better, better is faster, and fast is all that counts
Top
Posts: 135
Joined: Mon Jul 28, 2003 7:25 pm
Location: Melbourne

Contact:
Contact Smithy jnr

Winch Shaft

Post by Smithy jnr »

You can get the Gigglepin upgraded shafts from me, already drilled & tapped & stronger than the standard shaft, pm me for any further details.
Regards

Wayne
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

smithy how much for giggle pin sharft
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 77
Joined: Thu Sep 27, 2007 7:11 pm
Location: in shitsville

Post by REVNGQ »

Also try warren at flamin fabrications
0419 386 703

http://www.flaminfabrications.com.au/
GQ UTE
35 SIMEX

www.jpc.com.au
www.flaminfabrications.com.au
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

Sent you an email.

I do make my own brake shaft retainer, which doesn’t require me to drill and tap it. It seems to be effective and this modification costs a mere $60.

Cheers
Wazza
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

The_Wazza wrote:Sent you an email.

I do make my own brake shaft retainer, which doesn’t require me to drill and tap it. It seems to be effective and this modification costs a mere $60.

Cheers
Wazza
Could I fit the retainer myself? Or do you need to fit it?

Dave
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

MKPatrolGuy wrote:
The_Wazza wrote:Sent you an email.

I do make my own brake shaft retainer, which doesn’t require me to drill and tap it. It seems to be effective and this modification costs a mere $60.

Cheers
Wazza
Could I fit the retainer myself? Or do you need to fit it?

Dave
Better if I could do it and for that price why wouldn't you.
Waz
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

Better if I could do it and for that price why wouldn't you.
Waz
Because I'm in QLD... :cry:
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

benhl wrote:
Better if I could do it and for that price why wouldn't you.
Waz
Because I'm in QLD... :cry:
You'd need to just send me the shaft.
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

A local engineering shop had no trouble drilling and tapping my shaft without removing it from the winch. Had to remove the winch from the truck though and it would pay to drain the oil first.
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Top
Posts: 135
Joined: Mon Jul 28, 2003 7:25 pm
Location: Melbourne

Contact:
Contact Smithy jnr

shaft

Post by Smithy jnr »

giant racing, Gigglepin shaft kits, which include the shim kit to ensure good tooth contact with the floating drive gear, are $605, I have 8 in stock at the moment.
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

i make cromeolly ones up here. a number of people are running them and have not broke one since changing to mine.even a giggle pin has broken on a had pull where mine did not. drilled taped made $500 each .
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 20
Joined: Tue Nov 23, 2004 6:01 am
Location: England

Post by D9OSV »

Hi,

Intresting thread.

Could not help but notice you mention that a Gigglepin shaft had Failed?

If this is the case could you please pass on details as i am unaware of it and might need to supply a replacement for the customer? :)

We are very proud of the fact that we have sold in excess of over 500 shafts worldwide with only two failures to date (Poorly hardened batch of shafts and two sneaked through the net :roll: ) Both shafts were replaced at our cost including any other parts damaged as a result of the failure.

We have seen a few end cap retaining bolts shear and as a result Wayne is offering an up grade service for existing shafts for any Gigglepin users in Aus.
This bolt has also been upgraded on all new shafts.

Because the events we do are getting tougher, and tougher, we have to keep moving forward and upgrading as we go. As result of this we have a
"All new lower housing" incorperating a freespool built into the lower housing that keeps the gearbox the same size as a standard 8274.
These will be available in June.
Gutted we can not get it ready in time for the OBC, but good product and innovation takes time to get right and believe me it will be well worth the wait :cool:

Jim

Ps: Are these chrome moly shafts direct replacement ?or do they cure other problems in the winch as a Gigglepin shaft does ?
Gigglepin 4x4

The 8274 innovation company

www.gigglepin4x4.net
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests