Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mickey Thompson radial tyers are officially CRAP

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

have u ever had sidewall failure on any Mickey Thompson tyers


yes
36
23%
no
120
77%
 
Total votes: 156

Posts: 35
Joined: Sun Nov 12, 2006 3:05 am
Location: meadowbrook

Mickey Thompson radial tyers are officially CRAP

Post by phelloffasopha »

i have had alot of micky thompson tyres fail on me
Last edited by phelloffasopha on Tue Apr 08, 2008 7:03 pm, edited 3 times in total.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Re: Mickey Thompson tyers are officially CRAP

Post by RUFF »

phelloffasopha wrote:i have had alot of micky thompson tyres fail on me
Really? I have never heard of this problem with any of the MT range. I have ran the Claws in some of the harshest terrain in Australia at sub 5psi pressures and have never had even a single puncture.


Before anyone comments, yes i was previously sponsored by MT but this doesnt change what i have seen or heard. And as a former sponsored user of their products i have prob had personal contact with more MT users than most.
Last edited by RUFF on Tue Apr 08, 2008 6:48 pm, edited 2 times in total.
Posts: 35
Joined: Sun Nov 12, 2006 3:05 am
Location: meadowbrook

Post by phelloffasopha »

you runnin bias ply or radial
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

No problems here too, I've got the Baja Claws and i like them
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

phelloffasopha wrote:you runnin bias ply or radial
Bias. But you never mentioned anything other than MT tyres are officially crap :roll:

And most of the users of MT tyres that i have experiance with would have run Radials. And again i have NEVER heard this issue before from any of them.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

the radials steak easily. i had an aquaintance go through 3 tyres in 2 months with sticks through the sidewall... that is the only issue ive seen
turbos are nice but i'd rather be blown
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

i have allso ad a few mates puncture relativly new mtz's on sticks through the sidewall.
and my fc2's sidewall split on my 1st offroad trip on them.

good tread just seem to have a weaker sidewall
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

mt

Post by purplebus »

had the outer sidewall explode top and bottom simultaniously?? at the last allterrain on a log running 12psi. it was stuffed so i just kept going on it.(radial) still have it at home, have to fit old tyre for next round. thanx 4 the reminder.
broken is broken its not going to get anymore broken.
only the first roll hurts, then its a ride..
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

my 35 radial claws are for street only both times i have gone off road with them i blew the side wall, with 20 psi too. They were pretty much new as well... would not recomend them but maybe it was bad luck
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Posts: 35
Joined: Sun Nov 12, 2006 3:05 am
Location: meadowbrook

Post by phelloffasopha »

it wasnt luck their just crap



Tuflux308 wrote:my 35 radial claws are for street only both times i
have gone off road with them i blew the side wall, with 20 psi too. They were pretty much new as well... would not recomend them but maybe it
was bad luck
Posts: 555
Joined: Fri Aug 03, 2007 11:10 pm
Location: port melbourne,vic

Post by flexytj »

phelloffasopha wrote:it wasnt luck their just crap



Tuflux308 wrote:my 35 radial claws are for street only both times i
have gone off road with them i blew the side wall, with 20 psi too. They were pretty much new as well... would not recomend them but maybe it
was bad luck
what do you consider to be a good tyre then ?
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

That's a big call coming from you :roll:
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 35
Joined: Sun Nov 12, 2006 3:05 am
Location: meadowbrook

Post by phelloffasopha »

i've had three sets of goodyear wranglers and never popped one. even when there was no tread i was tryin to destroy them, and couldnt. i recently brought a set of micky thopmson mtz, had them on the rig for three weeks. second trip out they started poppin. so i am goin back to goodyear's.
so soon i will have a cheap set of mtz for sale after the repairs.
Posts: 33
Joined: Fri May 26, 2006 9:55 pm
Location: Victoria

Post by xl7fan »

I have radial claws on a Gq LWB done most terrain for nearly 60000K one puncture, No issue
Matt 2001 XL7. OME 2" lift, Cooper ATR's, TJM alloy bar, Piranha Dual battery setup, Command cruise control, Viper alarm, Uniden UHF.
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Post by michael a »

1 punture at about 2000km

wearng ok now at about 30k

As for the good years my mate had 2 sets of mtrs going around oz 4 of them all died in 20k the other 4 were good.

luck of the draw I guess.

mtrs hole the size of had middle of tread driving on tar with 35 psi.

The MT rep told me that my tyres are not load rated to go on my gq patrol.

Funny they have a poster with them on a GU a HEAVIER car than mine.
get under it
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

No complaints from me. All the sets i've had were radial Baja Claws. I've had 31's, 33's, 35's and 37's, only ever had one puncture on a 33 a few years back when i accidently drove over a sheep carcass and copped a bone into the main tread. Never had any sidewall issues though.

I think its a fairly bold statement to just call a brand of tyre "crap" in general, especially considering (from what you said) this is the first set you've ever had.

My current rear 33's (getting replaced tomorrow) were a bit hard, and borderline unroadworthy on our last bush trip where they copped an absolute hiding on sharp rocks. There were two guys on the trip that actually ruined their previously good tyres (none of the MT's) on the sharp rocky surface to the point of having them thrown out when we returned. They were on similar cars to mine, driven with similar style.

Coxy

PS. We usually spell it "tyres", not tyers.
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

i had 35 radial claws. never had ANY probs in all sorts of crazy terrain.
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

i had 35" radial claws as my road/sand set and would not recomend to anyone. as i've said before, by faaaaaaarrrrr the worst tyres i have ever owned.
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

also, can i vote for every radial claw that i had fail?? or can i just vote once?!
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

use the bias claw, so much better, i have 33" bias ply claws and i love them, however im upgrading to 35" simex as i dont like radial claws :D
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I voted no - but I've never had MT tyres. Is that a problem?
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

...This thread is funny. I went through six BF muddy K/O's in 2007 whilst also running balding radial 35" claws with 750000 million trillion klicks on them. Cant break em. Or at least they wanna outdo my last two BFG muddies. Run them at 8psi all the way to 35psi. Have punctured the tread a bit and are full of plugs. But sidewall? No issue. Or just lucky. Ran from narrandera up the oodnadatta, all the way to the rock and back fine. Prolly ten year old tyres now which may also help.
...or a bad batch came into the country.

My vote: they be heaps better than BFG Mud K/O. Got nothing on me Interco Thornbirds but. Yet to see anything that remotely comes close as being a tyre for all different terrains.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

never had sidewall damage but hate them anyhow. more of a road issue than offroad. I have MTZ's on my wagon, after you go offroad then reinflate they take a copule of days to go "round" again. :bad-words: They are a pain for that but off road seem sweet.
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

mule75 wrote:i had 35" radial claws as my road/sand set and would not recomend to anyone. as i've said before, by faaaaaaarrrrr the worst tyres i have ever owned.
I can't think of anyone who would think highly of a 35" MT radial claw as a road/sand tyre...
They are just too big and aggressive. If you want no sidewall flex, responsive braking, tyres that stay in balance & handle well on the road, buy some 31" pirellis or something... :?

I'm still on my first set of claws (3 years later) and other than being a bit big/difficult to balance, I can't fault them. never damaged one and even with the tread as worn as it is, they still grip like shit to a blanket for the stuff that I'm doing...

And going by the poll I'd say that they aren't "officially crap"...
Posts: 628
Joined: Fri Feb 21, 2003 10:11 pm
Location: Sydney

Post by napsta »

I've had my set of ATZ's now for 10 months / 30,000km.
They have been used for alot of city/road, long distance towing and fire trail style driving. They are wearing nicely and I am very happy with them.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Re: Mickey Thompson radial tyers are officially CRAP

Post by grimbo »

phelloffasopha wrote:i have had alot of micky thompson tyres fail on me
what is a lot?

What sort of failures?

What sort of Mickey Thompson tyres?

What sort of driving conditions, tyre pressures?

What vehicle?

What sort of kms on the tyres?
Ransom note = demand + collage
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

... bit hard to take the word of one who can't even spell tyres ... :roll:



... voted "no"
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

known 2 wrote:i have allso ad a few mates puncture relativly new mtz's on sticks through the sidewall.
x2
and my fc2's sidewall split on my 1st offroad trip on them.
for desert work AJ loves his.. although shitful in Toolangi gluggy clay.
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

The Mickey Thompson MTZs is the best tyre I have come across so far. No issues with the sidewalls.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Never had a problem with Radial Claws after 2 years off weekend warrior work at 15psi on the same set. They don't get treated nicely either.

Cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 158 guests