G'day, I'm now looking to upgrade my current motor (1HZ) instead of going to a 1HD as i previously posted for info about. I currently have a safari turbo kit on it, and Im chasing any info on how to go about making the motor itself produce more power (i.e: making it flow better and changing compression ratios etc.) And Building it to handle up to 30PSI or more of boost. Like specific brand names for parts or what exactly is available... I have no clue at the moment so any info is good info.
Cheers,
Nate
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Upgrades on 1HZ
Moderators: toaddog, Elmo, DUDELUX
The 1HZ wont handle 30PSI Or more or anything near that for the simple fact its in-direct injection, so it will need head work plus a big arse intercooler, not to mension how much it would cost to get the fuel pump set up right the Bottom end will need a frig load of stregnthening. the list goes on!
whack a V8 in and you'll be on your way
whack a V8 in and you'll be on your way
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
mate my motor had near 12 large put into it with this in mind (less than 30psi mind you) and ive still got to buy a turbo, set up the fuel properly, sort out the intercooler/induction. even after all this depending on who you talk to 25psi is the best you will get, less if you want it to last more than 6 months. vSAHARAx is right, go with the v8. for the same if not less money you will have way more power, with a lot less hassle. i sometimes wish i had, but i do love the sound of a wild turbo diesel
75 series - in progress...
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=178771
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=178771
Nate,
you will need forged pistons, custom rods and rings, great head porting, block oringed and fitted with head studs. The best i/c,cooling system and clutch you can find. Then a correct sized turbo to do it all with. Then pump and injector mods.
Good luck with this, dont let people say it cant be done.
Andy
you will need forged pistons, custom rods and rings, great head porting, block oringed and fitted with head studs. The best i/c,cooling system and clutch you can find. Then a correct sized turbo to do it all with. Then pump and injector mods.
Good luck with this, dont let people say it cant be done.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Who is online
Users browsing this forum: No registered users and 60 guests