Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine Upgrades on 1HZ

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 24
Joined: Sat Feb 02, 2008 5:16 pm
Location: Rockhampton

Engine Upgrades on 1HZ

Post by natharmstrong88 »

G'day, I'm now looking to upgrade my current motor (1HZ) instead of going to a 1HD as i previously posted for info about. I currently have a safari turbo kit on it, and Im chasing any info on how to go about making the motor itself produce more power (i.e: making it flow better and changing compression ratios etc.) And Building it to handle up to 30PSI or more of boost. Like specific brand names for parts or what exactly is available... I have no clue at the moment so any info is good info.

Cheers,
Nate
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

if you plan to do interal mods with compression and stuff you'd want to have a pretty big wallet.
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

The 1HZ wont handle :shock: 30PSI Or more :shock: or anything near that for the simple fact its in-direct injection, so it will need head work plus a big arse intercooler, not to mension how much it would cost to get the fuel pump set up right the Bottom end will need a frig load of stregnthening. the list goes on!

whack a V8 in and you'll be on your way :D
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 458
Joined: Thu Jun 23, 2005 7:59 pm
Location: Shah Alam, Malaysia

Post by bIg_ReD_bOiNs »

mate my motor had near 12 large put into it with this in mind (less than 30psi mind you) and ive still got to buy a turbo, set up the fuel properly, sort out the intercooler/induction. even after all this depending on who you talk to 25psi is the best you will get, less if you want it to last more than 6 months. vSAHARAx is right, go with the v8. for the same if not less money you will have way more power, with a lot less hassle. i sometimes wish i had, but i do love the sound of a wild turbo diesel :twisted:
75 series - in progress...

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=178771
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

You cant beat the factory turbo motor for balls and grunt...and it bolts straight in where the 1hz was.
Confucious say...man who argue with idiot, worserer himself
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Nate,

you will need forged pistons, custom rods and rings, great head porting, block oringed and fitted with head studs. The best i/c,cooling system and clutch you can find. Then a correct sized turbo to do it all with. Then pump and injector mods.

Good luck with this, dont let people say it cant be done.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

anything can be done but it depends how much money you want to throw at it. if i was going to spend 15 grand on an engine it wouldn't be a 1hz even though i have one and love it.
Post Reply

Who is online

Users browsing this forum: No registered users and 92 guests