Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ls1 Vs Ls2 flywheel

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Ls1 Vs Ls2 flywheel

Post by bru21 »

Are the LS1 and Ls2 flywheels the same as they are too dear new. hopeing i can use a wrecked Ls1 one. the part numbers are different from holden
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

As far as I know but havent put 2 side by side. The LQ9 has a different offset and six converter bolt holes not 3.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

Post by LUX90 »

I can get you a used one if you want to see if it fits, Should be able to get one from a LS1 no worries, Just remember though that they cant be machined as far as i know
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I thought the LS1/2 Flywheels were a dual mass(rubber bonded damper built in) flywheel and this is why they can not be machined??

You should be able to buy an aftermarket billet flywheel for either of these by now.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

thanks fellas.

where is the rubber as I had one on my old truck and never noticed it?

If you can sell me one LUX90, i'm in.

cheers all

justin
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

I dont have rubber on mine either I just looked at my spare

Maybe the later models???

And early ls1s are 3 hole
Top
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

Post by LUX90 »

Ill get it and you can have it, cost me nothing so ill pass on the savings, it will be a old one though. Genuine the clutch comes as a kit with the pressure plate flywheel and driven disc all together. Try Direct clutch services they may be able to tell you more about reusing an old flywheel. They arent dual mass, the V6 uses dual mass flywheels.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 148 guests