What does the AU Suzuki market need?

Post by **Low Range** » Fri May 23, 2008 4:31 am

Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road

Post by **pubic** » Fri May 23, 2008 6:16 am

more freebie promos.... for example for being the first to reply you could give me a set of crawler gears for free...

a bolt on ready to go power steering set up would be nice ( unless thats what your talking about with the ots)

do you do a twin stick set up at all?

Post by **neil_se** » Fri May 23, 2008 6:46 am

A bolt on wedge adaptor for the RHS Vitara (Sidekick) powersteering box would be a godsend.

Website · Post by **suzukiboy** » Fri May 23, 2008 7:32 am

neil_se wrote:A bolt on wedge adaptor for the RHS Vitara (Sidekick) powersteering box would be a godsend.

neil_se

What does that do/provide to the Vit.

Post by cj » Fri May 23, 2008 7:54 am

pubic wrote:

do you do a twin stick set up at all?

Yes, I got mine from Sean.

Post by **moose** » Fri May 23, 2008 8:04 am

Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road

competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose

Post by cj » Fri May 23, 2008 8:08 am

moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose

I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.

Post by **want33s** » Fri May 23, 2008 8:12 am

Sean,
X2... A Vitara (Sidekick) power steering adaptor would be awesome.

Your prices are great but shipping kills the savings.
Work out a cheaper way of getting stuff here and you'll double/triple your turnover.
Jas.

Suzukiboy: The bolt on adaptor does nothing for a Vit but its cool for bolting a Vit box to a Sierra.

Post by **Gwagensteve** » Fri May 23, 2008 8:26 am

Availability of OTT kickers? I don't think there's anyone in Aus with a genuine kicker and they look like they're the best solution for vitara wanting gears.

Steve.

Post by **moose** » Fri May 23, 2008 8:51 am

cj wrote:
moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.

hey sean , I reckon you need a shop on the eastern side of AU !!
melbourne would be ya best spot , ....need staff ???

Post by **MUD-PIGSIERRA** » Fri May 23, 2008 11:57 am

A bolt up or minimal welding Anti wrap bar for SPOA Sierras would be good.

Portal Hubs.....

Maybe a front Tube bar that has decent recovery points and winch cradle.

Post by **nicbeer** » Fri May 23, 2008 12:15 pm

ditto on the Power steering.

Been meaning to get some made but gotta get arss in gear,

Post by **fordy1** » Fri May 23, 2008 12:18 pm

low cogs for GVs and XL7s

Post by **foolsp33d** » Fri May 23, 2008 12:27 pm

moose wrote:
cj wrote:
moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.
hey sean , I reckon you need a shop on the eastern side of AU !!
melbourne would be ya best spot , ....need staff ???

X2..
i'll even work saturdays till 12 for free for the first 12 months!

Post by **brendan_h** » Fri May 23, 2008 3:53 pm

i will have to say power steering as well.
and i also agree on making it cheaper to send our way and you will alot more orders

Post by **Highway-Star** » Fri May 23, 2008 4:08 pm

MUD-PIGSIERRA wrote: Portal Hubs.....

Best suggestion yet, dont think its asking alot

Seriously: I think a seat adapter might go down well. Allot of people are always trying to figure out a way to put aftermarket seats, or seats from another car into their vehicles, so a bolt on adapter for a common seat (either aftermarket or common vehicle) could prove fruitfull. I took the cheap option here and bought second hand seats already setup for a Sierra; and it made life allot easier for me.

On the shipping note: a cheaper alternate that can be optioned for the larger items (which cost unfeasible amounts to ship), when delivery time is not such an issue. i.e. Shipping. Although this really could blow out time wise.

Post by **just cruizin'** » Fri May 23, 2008 4:25 pm

Apart from a steering box wedge and pitman arm to suit the vitara box to sierra tierod, everything else is pretty much covered.

Maybe some prefab weld on brackets to coil the rear using Nissan or the like OEM arms would be good

Post by **MUD-PIGSIERRA** » Fri May 23, 2008 5:26 pm

MUD-PIGSIERRA wrote:A bolt up or minimal welding Anti wrap bar

Maybe a front Tube bar that has decent recovery points and winch cradle.

...

Ooops forgot you guys all ready do that that gear.... By the way thanks for the stickers from my last order, Oh there is one thing you guys could add to your list, cos I havent seem them Stubby Coolers (Drink can coolers what ever there called over there)...

Post by **MUD-PIGSIERRA** » Fri May 23, 2008 5:31 pm

Highway-Star wrote: On the shipping note: a cheaper alternate that can be optioned for the larger items (which cost unfeasible amounts to ship), when delivery time is not such an issue. i.e. Shipping. Although this really could blow out time wise.

X 2 You guys are awesome so far with Freight on the smaller gear I get it in roughly 7 days from order and thats generally what I wait if not longer for parts in Aus.

I wouldn't mind waiting longer for bigger heavier things that I would like to order in the near future if shipping was a little cheaper, things like the 'Bad boy Nerf Bars' and rock sliders as a idea

Thanks

Josh

Post by **mr green** » Fri May 23, 2008 7:06 pm

how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason

Post by cj » Fri May 23, 2008 9:34 pm

Highway-Star wrote:
MUD-PIGSIERRA wrote: Portal Hubs.....

Best suggestion yet, dont think its asking alot

I know someone who was interested in making them to suit a Zook but I told him that the market wouldn't pay, just look how tight most owners are.

If you're serious what would you pay for them done right and I do mean right?

Post by cj » Fri May 23, 2008 9:38 pm

mr green wrote:how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason

A bolt on full floater will widen the rear more than stock. Is that acceptable? What is the market willing to pay? This would also mean running rear discs.

Post by **Hutch** » Fri May 23, 2008 9:57 pm

I be intersted in a "bolt-on-ready to go" rear disc brake conversion for sj410/413. Also so auto diff locks for the LJ80 front and rear diffs!
cheers

Post by **11_evl** » Sat May 24, 2008 5:34 am

hilux disk brake conversion.
i also noticed you dont sell weld on coil mounts, similer to these

Post by **saffrett** » Sat May 24, 2008 9:40 am

4 IN LIFT KIT FOR COILY WITH SOME TYPE OF STRUT BRACE AND SOME AUTO LOCKERS
NEW ARMS THAT DONT COST THE EARTH AND JOHNY JOINTS TO GO IN THEM

Post by **just cruizin'** » Sat May 24, 2008 11:42 am

What we realistically need are go hard bits for Jimny's and Vitara's. Sierra's with good bodies are becoming harder and harder to find therefore will be forced to modify these others more and more.

Adaptors to find gear driven transfers into Jimnys, good quality reasonably priced arms. Maybe even a bolt on or relatively easy SAS kit for the Vitara (Not sure whether this is even possible)

Post by **zook7177** » Sat May 24, 2008 3:08 pm

mainly just a cheaper way of getting the bit over to aus.

but i need CVs
rear axle
stronger tailshaft rear

Post by **mrw82** » Sat May 24, 2008 4:13 pm

LOCKERS for 1 litre diffs.

Post by **basketcase** » Sat May 24, 2008 6:10 pm

R/H high steer and Power steer conversions.

Post by **ofr57** » Sat May 24, 2008 8:00 pm

mr green wrote:how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason

YES

defiantly

and if you find a way to get things hear cheaper ..... THAT will be the icing on the cake

Outer Limits 4x4 Board

What does the AU Suzuki market need?

What does the AU Suzuki market need?

Re: What does the AU Suzuki market need?

Re: What does the AU Suzuki market need?

Re: What does the AU Suzuki market need?

Re: What does the AU Suzuki market need?

Who is online