Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What does the AU Suzuki market need?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 12
Joined: Sat Jan 13, 2007 11:10 am
Location: Provo, Utah, USA

What does the AU Suzuki market need?

Post by Low Range »

Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
www.LOWRANGEOFFROAD.com
Posts: 82
Joined: Fri Mar 07, 2008 12:38 pm
Location: Penrith

Post by pubic »

more freebie promos.... for example for being the first to reply you could give me a set of crawler gears for free... :lol:

a bolt on ready to go power steering set up would be nice ( unless thats what your talking about with the ots)

do you do a twin stick set up at all?
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

A bolt on wedge adaptor for the RHS Vitara (Sidekick) powersteering box would be a godsend.

Image
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Post by suzukiboy »

neil_se wrote:A bolt on wedge adaptor for the RHS Vitara (Sidekick) powersteering box would be a godsend.

Image
neil_se

What does that do/provide to the Vit.
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

pubic wrote:

do you do a twin stick set up at all?

Yes, I got mine from Sean.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Re: What does the AU Suzuki market need?

Post by moose »

Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Re: What does the AU Suzuki market need?

Post by cj »

moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Sean,
X2... A Vitara (Sidekick) power steering adaptor would be awesome. :lol:

Your prices are great but shipping kills the savings.
Work out a cheaper way of getting stuff here and you'll double/triple your turnover.
Jas.



Suzukiboy: The bolt on adaptor does nothing for a Vit but its cool for bolting a Vit box to a Sierra.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Availability of OTT kickers? I don't think there's anyone in Aus with a genuine kicker and they look like they're the best solution for vitara wanting gears.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Re: What does the AU Suzuki market need?

Post by moose »

cj wrote:
moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.
hey sean , I reckon you need a shop on the eastern side of AU !!
melbourne would be ya best spot , ....need staff ??? :D :armsup: :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

A bolt up or minimal welding Anti wrap bar for SPOA Sierras would be good.

Portal Hubs..... :lol:

Maybe a front Tube bar that has decent recovery points and winch cradle.
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

ditto on the Power steering.

Been meaning to get some made but gotta get arss in gear,
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Post by fordy1 »

low cogs for GVs and XL7s :D
www.outdoorauto.com.au - we love doing new GVs....
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Re: What does the AU Suzuki market need?

Post by foolsp33d »

moose wrote:
cj wrote:
moose wrote:
Low Range wrote:Just wanted to ask what does the AU Suzuki market need.

Pondering a few products and just wanted to see what is really needed?

One thing we are looking at is the OTS steering kits for your right hand drive zuks.

Anything else come to mind that is not currently available or needs to be made better?

Thanks
Sean
Low Range Off-Road
competitivly priced.........
..gear sets
..chromo axles
..unbreakable CV,s
..body armour
..transfer case mounting systems
..twin sticks
..rear disconnects
..bolt in engine upgrade kits

there,s propably more !!!

Moose
I've bought a number of those items from Sean as he had the best prices when you added shipping into the equation.
hey sean , I reckon you need a shop on the eastern side of AU !!
melbourne would be ya best spot , ....need staff ??? :D :armsup: :D
X2..
i'll even work saturdays till 12 for free for the first 12 months!
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

i will have to say power steering as well.
and i also agree on making it cheaper to send our way and you will alot more orders
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

MUD-PIGSIERRA wrote: Portal Hubs..... :lol:
:D
Best suggestion yet, dont think its asking alot :lol:

Seriously: I think a seat adapter might go down well. Allot of people are always trying to figure out a way to put aftermarket seats, or seats from another car into their vehicles, so a bolt on adapter for a common seat (either aftermarket or common vehicle) could prove fruitfull. I took the cheap option here and bought second hand seats already setup for a Sierra; and it made life allot easier for me.

On the shipping note: a cheaper alternate that can be optioned for the larger items (which cost unfeasible amounts to ship), when delivery time is not such an issue. i.e. Shipping. Although this really could blow out time wise.
Wheeling on completely wicked angles, without even looking stable.
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Apart from a steering box wedge and pitman arm to suit the vitara box to sierra tierod, everything else is pretty much covered.

Maybe some prefab weld on brackets to coil the rear using Nissan or the like OEM arms would be good
;)
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

MUD-PIGSIERRA wrote:A bolt up or minimal welding Anti wrap bar

Maybe a front Tube bar that has decent recovery points and winch cradle.
... :oops: Ooops forgot you guys all ready do that that gear.... By the way thanks for the stickers from my last order, Oh there is one thing you guys could add to your list, cos I havent seem them Stubby Coolers (Drink can coolers what ever there called over there)... :cool:
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

Highway-Star wrote: On the shipping note: a cheaper alternate that can be optioned for the larger items (which cost unfeasible amounts to ship), when delivery time is not such an issue. i.e. Shipping. Although this really could blow out time wise.
X 2 You guys are awesome so far with Freight on the smaller gear I get it in roughly 7 days from order and thats generally what I wait if not longer for parts in Aus.

I wouldn't mind waiting longer for bigger heavier things that I would like to order in the near future if shipping was a little cheaper, things like the 'Bad boy Nerf Bars' and rock sliders as a idea

Thanks

Josh
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Highway-Star wrote:
MUD-PIGSIERRA wrote: Portal Hubs..... :lol:
:D
Best suggestion yet, dont think its asking alot :lol:
I know someone who was interested in making them to suit a Zook but I told him that the market wouldn't pay, just look how tight most owners are.

If you're serious what would you pay for them done right and I do mean right?
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

mr green wrote:how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason
A bolt on full floater will widen the rear more than stock. Is that acceptable? What is the market willing to pay? This would also mean running rear discs.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 105
Joined: Sun Feb 13, 2005 9:22 am
Location: Bris, Qld

Post by Hutch »

I be intersted in a "bolt-on-ready to go" rear disc brake conversion for sj410/413. Also so auto diff locks for the LJ80 front and rear diffs!
cheers
Here is a test to find whether your mission on earth is finished: If you’re alive it isn’t.
- Richard Bach
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

hilux disk brake conversion.
i also noticed you dont sell weld on coil mounts, similer to these
Image
michael
Posts: 127
Joined: Thu Apr 12, 2007 7:30 pm
Location: central coast

Post by saffrett »

4 IN LIFT KIT FOR COILY WITH SOME TYPE OF STRUT BRACE AND SOME AUTO LOCKERS
NEW ARMS THAT DONT COST THE EARTH AND JOHNY JOINTS TO GO IN THEM
1990 lwb vit
4 in lift
winch,lockers,gears, 31's
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

What we realistically need are go hard bits for Jimny's and Vitara's. Sierra's with good bodies are becoming harder and harder to find therefore will be forced to modify these others more and more.

Adaptors to find gear driven transfers into Jimnys, good quality reasonably priced arms. Maybe even a bolt on or relatively easy SAS kit for the Vitara (Not sure whether this is even possible)
;)
Posts: 88
Joined: Sat Sep 08, 2007 11:28 pm
Location: Sydney

Post by zook7177 »

mainly just a cheaper way of getting the bit over to aus.

but i need CVs
rear axle
stronger tailshaft rear
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay

Post by mrw82 »

LOCKERS for 1 litre diffs.
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

R/H high steer and Power steer conversions.
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

mr green wrote:how about making the rear full floating axle kits . i saw a link to a kit somone else used to make a while ago and it looked great. few people here doing there own but would be great to be able to buy the axles and brackets as a kit.
jason
YES

Image
defiantly

and if you find a way to get things hear cheaper ..... THAT will be the icing on the cake
:D
[color=green]Vote Earth[/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests