Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bolt for a J-Top

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 47
Joined: Wed Mar 26, 2008 11:07 am
Location: Brisbane

Bolt for a J-Top

Post by lmacka »

I'm chasing a bolt which has fallen out of my '92 J-Top. Where's the best place to go and get one? Mitsubishi doesn't seem to want to help me, so should I try something like NuBolt? Obviously I need a high tensile one, anything else I need to know?

Also, does anyone happen to know the dimentions of the bolt pictured below? The diagram's from the manual which doesn't specify part types/numbers.

Image

Sorry if this is a stupid question... I'm no bolt expert... :)
Top
Posts: 27
Joined: Thu Jan 25, 2007 2:23 pm
Location: Columbia, SC USA

Post by FrankR »

I replaced all of mine with grade 10.9 and nylock nuts. If you can find the fine thread, be sure to use them. I have a bag of extras, but shipping from the States might be a bit rich. Let me know if you need it that badly.

Frank
'89 G-Raider Supercharged 3.0L V6, MegaSquirt 2, lockup A/T, 2.5" exhaust, Cibie H4s/Oscar SCs, Hella Micro DE fogs, S/W hubs, Bilsteins, 165A alt., Aussie Locker front/LSD rear
Top
Posts: 47
Joined: Wed Mar 26, 2008 11:07 am
Location: Brisbane

Post by lmacka »

Mate do you happen to know the dimentions of those bolts? I'm at work and am trying to chase up a set today so I can fix it tonight, put it in for a wheel alignment tomorrow and have it ready for a bashin' on the weekend!

Cheers!
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

12mm x 65mm if my memory serves me correctly.
By the way did you have a wheel alightment done recently? These bolts have a habit of coming lose after being played with, so they should be replaced when doing a wheel alightment.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 27
Joined: Thu Jan 25, 2007 2:23 pm
Location: Columbia, SC USA

Post by FrankR »

The OE bolts on my '89 were M12 x 50mm 10T. I replaced them with M12 1.25 x 60mm in order to accomodate extra shims and the longer nylock nuts.

Frank
'89 G-Raider Supercharged 3.0L V6, MegaSquirt 2, lockup A/T, 2.5" exhaust, Cibie H4s/Oscar SCs, Hella Micro DE fogs, S/W hubs, Bilsteins, 165A alt., Aussie Locker front/LSD rear
Top
crh
Posts: 43
Joined: Tue May 29, 2007 8:06 pm
Location: NSW

Post by crh »

glenn_c, you list rear swaybar disconnects in your sig. Were they custom or where did you get them?

Have been wanting to do something for a while and don't want to just take it off and lose on-road handling.

Would like to know your thoughts.

Cheers.
Col
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 15 guests