Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Recentering Wheels with Suzuki Centres
Recentering Wheels with Suzuki Centres
Hi All,
I had a chat recently with Rod (Rodified) about running wide tyres and rims on a suzuki.
Once outcome of this discussion with the idea that it was cheaper to buy / source a set of wide rims for a 6 stud patern (i.e. toyota / nissan), cut out the centres, and drop in some 5 stud centres. The end result being something like a 15x10 5 on 5.5's for much less than the cost of buying them new.
It is also far more common to find 6 stud wheels attached to big tyres in the trading post, then it is to find them 5 stud wheels.
Has anyone done this? If so, I'd like to hear what rim types you used. (i.e. Speedies, ROH Track II's). And if you were able to use the centres out of a stock sierra rim - because obviously everyone already has these and they are basically free if you don't.
Thanks,
Greg
I had a chat recently with Rod (Rodified) about running wide tyres and rims on a suzuki.
Once outcome of this discussion with the idea that it was cheaper to buy / source a set of wide rims for a 6 stud patern (i.e. toyota / nissan), cut out the centres, and drop in some 5 stud centres. The end result being something like a 15x10 5 on 5.5's for much less than the cost of buying them new.
It is also far more common to find 6 stud wheels attached to big tyres in the trading post, then it is to find them 5 stud wheels.
Has anyone done this? If so, I'd like to hear what rim types you used. (i.e. Speedies, ROH Track II's). And if you were able to use the centres out of a stock sierra rim - because obviously everyone already has these and they are basically free if you don't.
Thanks,
Greg
DMA Founding Member #1 - Now Retired
New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.
I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.
Greg, I reckon its doable, Anthony got the centres machined out of his sunrasias and re-welded for more off set for about $35-40. That said taking an ROH centre from a zook 15X7 and putting it in a TOY 15X10 should be perfect.
As far as zook I know somebody getting rid of Zook Trak II's
yeshemesh
the rims on Chris' LWB are actually Lada Niva rims with Sierra centres. It was the only way I could get a 6" rim with the 16" centre for the SATs at the time. I don't see why it would n't work. As you said you can pick up cheap rims for Nissans/Toyotas and it is an easy matter to cut the centre out and reweld a new Sierra centre
Ransom note = demand + collage
bigsteve wrote:GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.
I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.
Bingo big steve... you are right on the money there.
DMA Founding Member #1 - Now Retired
greg wrote:bigsteve wrote:GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.
I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.
Bingo big steve... you are right on the money there.
You could fit your Boggers on my 15X8's
yeshemesh
bigsteve wrote:greg wrote:when exactly did my car lose PHAT status?
When you took my tyres off it and stopped mall cruising
hahaha - now i remember... actually i took my 'farty' car out for a spin lastnight and my new neighbours (who have obviously never seen my car running before since it has been a while since the last trip) got the surprise of their lives when i came screaming up the driveway under full noise with sneazes
DMA Founding Member #1 - Now Retired
Who is online
Users browsing this forum: No registered users and 1 guest