Nah just joking mate I hope they serve you well, and remember pics are good make sure you get some when you put them in. Ill just have to save for some them and order some from Loktup4x4 when I have some more money... 
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
locktup4x4.com.au giveaway ZukEvilTwin Twinstick Kit
Damn you 84ZOOKSTA......... Nah just joking mate I hope they serve you well, and remember pics are good make sure you get some when you put them in. Ill just have to save for some them and order some from Loktup4x4 when I have some more money...
Nah just joking mate I hope they serve you well, and remember pics are good make sure you get some when you put them in. Ill just have to save for some them and order some from Loktup4x4 when I have some more money... ..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Hey Simon, I think i should be the one to get the sticks as I took that great photo!!!
Good luck to u mate! well done...now hurry up and get your car on the road...well mine is screwed now too so take your time!
Good luck to u mate! well done...now hurry up and get your car on the road...well mine is screwed now too so take your time!
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
Hey all just a quick one to let you all know the Twin Sticks are in.
Very easy to install, come with great instructions and all that is required for the install.
Will have pics and a write up on it soon.
And must say once again thanks to locktup4x4.com.au
Great product and a great idea.
Cheers
Simon..
Very easy to install, come with great instructions and all that is required for the install.
Will have pics and a write up on it soon.
And must say once again thanks to locktup4x4.com.au
Great product and a great idea.
Cheers
Simon..
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
OK people I know I have been slack but I'm finally getting around to installing my 6.5's and twin sticks. What I'm wondering is which ball bearing needs to be left out? I can't find definative info anywhere. Is it the one deep inside the case?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Sadly, It's the one between the two rails which means the rails have to come right out of the case. The one on the inside of the case stays.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Yup, the detent ball is located between the shift rails and the case must be split to remove it. There's an article here that show the install and has a link to removing the detent ball step by step http://www.izook.com/tech/samurai/drive ... ltwins.htm
Good luck.
Good luck.
[url]http://www.zukeviltwin.com/[/url]
I've got that page and it doesn't really specify exactly which ball to remove only shows pictures. I thought it was the one on the inside. No worries got it all apart for the new 6.5 gears anyway 
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
It does, there's another link within the article that you need to click that refers back to another twin stick install and step by step instuctions on removing the interlock ball http://www.izook.com/tech/samurai/drive ... /twins.htmGRPABT1 wrote:I've got that page and it doesn't really specify exactly which ball to remove only shows pictures. I thought it was the one on the inside. No worries got it all apart for the new 6.5 gears anyway
[url]http://www.zukeviltwin.com/[/url]
I've look at that link and it still doesn't explain how to remove it, basically just says it's you have to dis-assemble the case and refer to pics.
Anyway it's all good now thanks guys.
Anyway it's all good now thanks guys.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
What type have you got , a pic of the shifter would be good and the middle ball needs to be removed , in the pic on the right no-4 needs to be removed , this detent ball stops you shifting the 4wd selector when twinsticks are used , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
This is everything I have, as you can see there isn't anything in the front housing that resembles a shift sheet. I Don't know how long it's been gone or where is went but it's not there now lol. I was thinking because of the twin sticks flat bottom design it would not need it?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
You don't need a shift sheet with the Evil Twin. We designed it to eliminate that point of failure. If you have any other questions on the install let me know.GRPABT1 wrote:Yeah I know that, wondering about the shift sheet yet. I pm'd bazooked cause he's already installed his twin stick.
[url]http://www.zukeviltwin.com/[/url]
Who is online
Users browsing this forum: No registered users and 101 guests