Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LT230 Transfer

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 71
Joined: Thu Sep 02, 2004 9:56 pm
Location: Somewhere in Mexico ;D

LT230 Transfer

Post by Nice_Surf »

I've just got a LT230 transfer for the Rangie as I've been told it'll bolt up with no problems (I've got what I need to convert it) but I looked in the bible to compare the different ratios and the one I have has a serial number starting with 61D as is't a from a 2000 Disco and on the case it has a tag I found saying 1.211 ratio and it has the locker in it :D

Trav
'91' Dual Cab Hilux
'07' Suzuki GSX1400
'82' Suzuki PE250Z
What more do I need
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

:?: :?: :?:

Yes that should be correct. It was the late 2001 - 2002 that didn't have the CDL, and all LT230's that came from 4WD's that ran 29" tyres had the 1.2 high range.

Also note that the front output flange is not the normal Rover PCD sizing.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 71
Joined: Thu Sep 02, 2004 9:56 pm
Location: Somewhere in Mexico ;D

Post by Nice_Surf »

So I get it right when I put it in what is the best oil to use in the LT230 with locker ??

Trav
'91' Dual Cab Hilux
'07' Suzuki GSX1400
'82' Suzuki PE250Z
What more do I need
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 38 guests