Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vitara diff height

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 112
Joined: Tue Jan 22, 2008 6:43 pm
Location: perth, Australia

vitara diff height

Post by shandy »

hi all,

i always here info about sierra's about how the diff height is the same on 33's as a patrol on 35's ect.
but i have never heard anything about vitara diff's. are they the same as sierra's or are they different?
for example a vitara on ....'s is the same as a ........ on ....'s????( fill in)

thanks guys.
i did search, but it didn't seam to work for me

mitch
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

IIRC, ground clearance on the older Vits in stock form is around 200mm.

You can do the sums from there as far as increases with larger tyres and comparing things with Patrols, etc. Try Google for specs...
bru21 wrote:What happens in goat, stays in goat!
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

vitara diffs are a fair bit bigger than sierra.

They can be shaved pretty hard though.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Post by Rotazuk »

From my measurements a sammy diff housing is 22cm dia and a vitara is 24cm . So only a loss of 10mm , less that 1/2 inch , in clearance .

When I was setting the vitara diff up in the buggy it was not worth shaving as I would not get more than 5 mm . The diff sits flat at ride height thou . if teh diff points up you could take a little out of the back of it , but the flange is pretty much at the edge of teh diff .

The old toy axles I had could have a fair bit taken out of them thou :)
Posts: 215
Joined: Sat Jun 21, 2003 12:59 am
Location: Launceston

Post by mtb4x4mad »

Here's a little calc I put together a while ago with various tyre sizes comparing a 93 4 dr Vit to a GU patrol.


http://www.esnips.com/doc/7abf70a2-c164 ... clearances
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Then you have the front diff, its higher again
LWB Vit, Trail Slayer
Posts: 112
Joined: Tue Jan 22, 2008 6:43 pm
Location: perth, Australia

Post by shandy »

hi all

thanks for the info,
im not sure if it was me or not, but that link didnt work, came up as bad link.

Does anyone know of any comparson facts about vitara's to cruisers/patrols ect?

thanks

mitch
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

What do you want to know?

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 112
Joined: Tue Jan 22, 2008 6:43 pm
Location: perth, Australia

Post by shandy »

ok, i have 235,75, r15's and would like to know what size tyre does a cruiser/ patrol have to have to have the same clearance?

thanks
mitch
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests