Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vitara diff height
vitara diff height
hi all,
i always here info about sierra's about how the diff height is the same on 33's as a patrol on 35's ect.
but i have never heard anything about vitara diff's. are they the same as sierra's or are they different?
for example a vitara on ....'s is the same as a ........ on ....'s????( fill in)
thanks guys.
i did search, but it didn't seam to work for me
mitch
i always here info about sierra's about how the diff height is the same on 33's as a patrol on 35's ect.
but i have never heard anything about vitara diff's. are they the same as sierra's or are they different?
for example a vitara on ....'s is the same as a ........ on ....'s????( fill in)
thanks guys.
i did search, but it didn't seam to work for me
mitch
From my measurements a sammy diff housing is 22cm dia and a vitara is 24cm . So only a loss of 10mm , less that 1/2 inch , in clearance .
When I was setting the vitara diff up in the buggy it was not worth shaving as I would not get more than 5 mm . The diff sits flat at ride height thou . if teh diff points up you could take a little out of the back of it , but the flange is pretty much at the edge of teh diff .
The old toy axles I had could have a fair bit taken out of them thou
When I was setting the vitara diff up in the buggy it was not worth shaving as I would not get more than 5 mm . The diff sits flat at ride height thou . if teh diff points up you could take a little out of the back of it , but the flange is pretty much at the edge of teh diff .
The old toy axles I had could have a fair bit taken out of them thou
Here's a little calc I put together a while ago with various tyre sizes comparing a 93 4 dr Vit to a GU patrol.
http://www.esnips.com/doc/7abf70a2-c164 ... clearances
http://www.esnips.com/doc/7abf70a2-c164 ... clearances
Who is online
Users browsing this forum: No registered users and 71 guests