Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Diff

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 30
Joined: Sun Nov 27, 2005 9:23 am
Location: Toowoomba

Front Diff

Post by forissan »

Can anyone tell me if a front diff from a GU front axel will fit a GQ front
axel or not , or does it need any mods :?:
Just wondering befor I get hold of it.
Top
Posts: 160
Joined: Sun Oct 26, 2008 11:40 am
Location: beenleigh

Post by zookster666 »

a gu diff housing will fit a gq but the axles and centre will not
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

axle doesnt fit... centre does.

EDIT: inner axle does fit just the outer that doesnt.
turbos are nice but i'd rather be blown
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

i thought there was 30 mm overall difference ?????
THE GRASS MAY BE GREENER ON THE OTHER SIDE BUT YOU STILL GOTTA MOW IT.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

its in the CV and outershaft. well last time i checked (they may have been cut to fit though)
turbos are nice but i'd rather be blown
Top
Posts: 30
Joined: Sun Nov 27, 2005 9:23 am
Location: Toowoomba

Post by forissan »

Looking into this becouse I know somone who has a complete front
diff for a GU with an air locker fitted, I can get it for a resonable price but just wanting to see if I can put the air locker in my GQ.
Or he might just have to sell it :roll:
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

Airlocker will fit.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

its the outer half that wont fit. you can even use the GU brakes and calipers to upgrade your brakes im pretty sure
turbos are nice but i'd rather be blown
Top
Posts: 30
Joined: Sun Nov 27, 2005 9:23 am
Location: Toowoomba

Post by forissan »

Sweeeeeeet. Give me somthing to do for the next few weekend.
B :cool:
By the way has many people changed the air lockers themselve
how hard would it be or best to pay somone to do it.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

Are you talking about changing the centre or just carrier?

If its the same ratio just change the centre.
Top
Posts: 30
Joined: Sun Nov 27, 2005 9:23 am
Location: Toowoomba

Post by forissan »

Prob just change the centre if it will fitt.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

easy job to change just the centre with minimal tools.

easy way sit the axle on axle stands, remove hubs n cv's.

Remove lhs tierod and pull the linkage under the car to rhs.

Undo the rhs radius arm bolt behind the centre and push it toward the RHS of car, onle push it in flush with the mount plate.

Undo the bolts around the diff cente and there may be 2 bolts clamping the breakline to thr cente.

Then roll the centre out and it will almost balance on the pinion flange.

Repeat in reverse order for install.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 104 guests