Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mounting gauges in a GU...

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 119
Joined: Wed Sep 19, 2007 6:48 pm
Location: liverpool shire LOL

mounting gauges in a GU...

Post by built2redline »

i had some guages left over from another car and i decided to make a couple of pods for the GU

so i went to the local bunnings and got myself 2 x 50mm PVC 90degree bends.
Image

these fit the gauges perfectly
Image

cut the PVC to size
Image
Image

checked the position
Image

pulled out the pillar cover and drilled a 54mm hole with a hole saw
Image
Image

54mm was big enough for the PVC to fit snugly
Image
Image
Image
Image

test fitted the pillar cover and marked the position for the second gauge
Image
Image

repeated the process for the second gauge
Image
Image

and fitted them again to the ute.

Image
Image
Image

......

To be continued.....
Top
Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

Post by nabstud »

Nice work thinking outside the square!
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Nice work mate.

Even the Missus liked it.
First comment was "Why didn't you think of that before spending so much money on a pillar pod?"
GU Patrol with go better bits added
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Very clever.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Nice work there fella.
But mechanical oil pressure in cab?
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 119
Joined: Wed Sep 19, 2007 6:48 pm
Location: liverpool shire LOL

Post by built2redline »

thanks guys . ill post more pictures as my little project progresses.

the mechanical oil press guage is just a stand in for the time being..ill be replacing it with a pyrometer as soon as i fing one in celcius and not farenheit.

i learn my lesson in the old car where the oil gauge leaked into the dash....NEVER AGAIN!!
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Ah, that looks better than a lot of more expensive options... well done.
This is not legal advice.
Top
Posts: 119
Joined: Wed Sep 19, 2007 6:48 pm
Location: liverpool shire LOL

Post by built2redline »

well here are the pods, sanded, plastic primed and coated with satin black plastic paint.

Image

i must say they are looking good! :D

must resist the temptation to install today..gotta let them dry for 24hrs.
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

thats great, those pillar pods arn't angled in the right direction anyway IMO, good work!
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

Looking good!
I might have done that.... I've bought pillar pods instead but I had to cut the back open as the VDO gauges are a bit too long :roll:
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

great idea and write up. i gues that gets around the problem (as mentioned above) about some brands of gauges not fitting the pillar pods correctly.
Top
Posts: 7
Joined: Wed Mar 04, 2009 5:41 pm
Location: Tamborine, Qld, 4270

Post by Crew Cav »

Great Idea. Wow, Cav :-)
Thanks, Cav :-)

03 Nissan Patrol Crew Cab GU with 6 seats on airbag suspension
www.crewcav.webs.com
Top
Posts: 119
Joined: Wed Sep 19, 2007 6:48 pm
Location: liverpool shire LOL

Post by built2redline »

well they are almost finished.

the gauges were fitted to the painted pods

Image

and the pods were fitted to the pillar
Image
Image
Image

and from the drivers point of view
Image

im going to drive around tomorrow and if i like the way the gauges are positioned (i can still ajust the angle and height) then ill pull the pillar cover out and plastic weldand adhere the pods to the pillar cover.
Top
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

very neat job mate!! looks like a brought one ;)
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

how do the gauges stay in the plastic tubes?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Post by ANIMAL »

built2redline,

That has got to one of the best/easyest mod i've ever seen :armsup: :armsup:
well done mate love ya work,thinkin outside the box at its
best :idea: :idea:

Animal
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 61 guests