Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
USA Nissan V8
USA Nissan V8
Has anybody thought of fitting a Nissan V8 from the states to a patrol? these seem to be cheap enough,
does anybody know the bell housing pattern?
are there are conversion kits available ?
found this link and thought about importing one,
cheers
http://cgi.ebay.com/ebaymotors/05-06-NI ... 240%3A1318
does anybody know the bell housing pattern?
are there are conversion kits available ?
found this link and thought about importing one,
cheers
http://cgi.ebay.com/ebaymotors/05-06-NI ... 240%3A1318
Living the dream on the hill that floods
Re: USA Nissan V8
Will it physically fit?
Will it pass emissions?
Spares?
there arent enough engine options already with off shelf go fast bits?
Will it pass emissions?
Spares?
there arent enough engine options already with off shelf go fast bits?
A speed camera would have prevented that!
Although an interesting idea, i would suggest against it unless you have VERY deep pockets. As bogged said, there's plenty of other options out there.
Some info:
Some info:
Wiki wrote: Nissan VK56DE
The VK56DE is a 5.6 L (5552 cc) version built in Decherd, TN. Bore is 98 mm (3.9 in) and stroke is 92 mm (3.6 in). Output is 317 hp - 320 hp (227 kW) at 4900 rpm with 375 to 390 ft·lbf (509-522 Nm) of torque at 3600 rpm. It has aluminum-alloy block and heads and low-friction molybdenum-coated pistons. The valvetrain is a dual overhead cam (DOHC). It has 4 valves per cylinder with micro-finished camshafts and ductile iron cylinder liners for increased durability.
Motorsport
Nismo also uses the VK56DE for FIA GT1 racing. In race trim, it produces 600 horsepower and 479 pound-feet of torque.[4]
Applications:
2004–present Nissan Armada, 317 hp (236 kW)
2004–present Nissan Titan, 317 hp (236 kW)
2004–present Infiniti QX56, 320 hp (240 kW)
2008–present Nissan Pathfinder, 310 hp (230 kW)
2009 Nissan GT-R GT1, 600 hp (450 kW)
Note: the Titan numbers are for 87 octane fuel. The 320 hp (240 kW) number for the Infiniti was using premium (91 octane) fuel. Using 91 octane fuel equalized the hp number.
Re: USA Nissan V8
anything will fit if u want it bad enoughbogged wrote:Will it physically fit?
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Re: USA Nissan V8
I'll drop the barina off tonightgq351 wrote:anything will fit if u want it bad enoughbogged wrote:Will it physically fit?
Posts: 1400
Joined: Thu Nov 11, 2004 12:20 pm
Joined: Thu Nov 11, 2004 12:20 pm
Location: Mackay - Outerlimits; more extreme than your mum!
Re: USA Nissan V8
bogged wrote:I'll drop the barina off tonightgq351 wrote:anything will fit if u want it bad enoughbogged wrote:Will it physically fit?
bogged brings teh funnay....
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
have a read up on the frontier site, i think the v8 fits into the D40/Frontier ok so a good chance it may fit the patrol.
http://www.clubfrontier.org/forums/index.php
http://www.clubfrontier.org/forums/index.php
Re: USA Nissan V8
haha well within reason boggedbogged wrote:I'll drop the barina off tonightgq351 wrote:anything will fit if u want it bad enoughbogged wrote:Will it physically fit?
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Thanks Bog your comments are appreciated!
not helpful, not tech, when you turn on your computer do you ask your self "how many people can I piss off today"
There is only one real petrol engine convention and that is the LS1
(in the large petrol class)
holden v8's (5L) are big, heavy, slow, uneconomical and common.
Advantages of a Nissan V8,
keep the Nissan theme,
something different,
good power
good torque
good economy
still need to find the bell housing pattern?
As for emissions if it was released in the States and complies with US laws then I see no real problem fitting it to a patrol. no different to a LS1
not helpful, not tech, when you turn on your computer do you ask your self "how many people can I piss off today"
There is only one real petrol engine convention and that is the LS1
(in the large petrol class)
holden v8's (5L) are big, heavy, slow, uneconomical and common.
Advantages of a Nissan V8,
keep the Nissan theme,
something different,
good power
good torque
good economy
still need to find the bell housing pattern?
As for emissions if it was released in the States and complies with US laws then I see no real problem fitting it to a patrol. no different to a LS1
Living the dream on the hill that floods
What auto was behind the VK56?patrol man wrote:T
still need to find the bell housing pattern?
As for emissions if it was released in the States and complies with US laws then I see no real problem fitting it to a patrol. no different to a LS1
If its the same 5spd behind the TB48, with out measuring. Thats gotta be a positive thing.
Similar to what people do with the VH45. As it almost has the same 4spd auto as the TD42, ZD30, TB42 & TB45.
THOUGHT FOR THE DAY....
patrol man wrote:Thanks Bog your comments are appreciated!
not helpful, not tech,
Thats not tech? bout as much "tech" as your post...bogged wrote:Will it physically fit?
Will it pass emissions?
Spares?
as long as its you... my day is a success.when you turn on your computer do you ask your self "how many people can I piss off today"
bwahahahaa...bogged wrote:patrol man wrote:Thanks Bog your comments are appreciated!
not helpful, not tech,Thats not tech? bout as much "tech" as your post...bogged wrote:Will it physically fit?
Will it pass emissions?
Spares?
as long as its you... my day is a success.when you turn on your computer do you ask your self "how many people can I piss off today"
A speed camera would have prevented that!
Would imagine it would fit a patrol if it fits a Navara. What computer would you run Standard or after market. Will the standard computer run just the engine. Or is it intergrated to the traction control, gear box, hill decent and other electrical gobbin.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
I say go for it, Just cause no one has done it doesn't mean its not possible. The only thing i would want to check up on is if you will have issues with security running the factory ECU. Other than that should be able to run the engine standalone no worries.
I would not run aftermarket ECU, as you will have more headaches than its worth, and will require alot of tuning to meet emissions.
Steve
I would not run aftermarket ECU, as you will have more headaches than its worth, and will require alot of tuning to meet emissions.
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Nissan uses the VK56 in the Pathfinder here in the US.
They also built a one-off Xterra with a Titan driveline: http://www.thenewx.org/forum/showthread.php?s=0&t=3333
There's a private project to swap a VK56 into a Frontier (Navara) documented here:
http://www.clubfrontier.org/forums/f11/ ... wap-43001/
Don't know if that's of any help. Personally, I'd go with the VH45 instead.
They also built a one-off Xterra with a Titan driveline: http://www.thenewx.org/forum/showthread.php?s=0&t=3333
There's a private project to swap a VK56 into a Frontier (Navara) documented here:
http://www.clubfrontier.org/forums/f11/ ... wap-43001/
Don't know if that's of any help. Personally, I'd go with the VH45 instead.
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Who is online
Users browsing this forum: No registered users and 46 guests