Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

USA Nissan V8

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

USA Nissan V8

Post by patrol man »

Has anybody thought of fitting a Nissan V8 from the states to a patrol? these seem to be cheap enough,
does anybody know the bell housing pattern?
are there are conversion kits available ?
found this link and thought about importing one,
cheers
http://cgi.ebay.com/ebaymotors/05-06-NI ... 240%3A1318
Living the dream on the hill that floods
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: USA Nissan V8

Post by bogged »

Will it physically fit?
Will it pass emissions?
Spares?

there arent enough engine options already with off shelf go fast bits?
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Engine specs: Nissan 3498cc (5.6L)...ahhh wrong. 5.6 L is supposed to be 5600cc
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Although an interesting idea, i would suggest against it unless you have VERY deep pockets. As bogged said, there's plenty of other options out there.

Some info:
Wiki wrote: Nissan VK56DE
The VK56DE is a 5.6 L (5552 cc) version built in Decherd, TN. Bore is 98 mm (3.9 in) and stroke is 92 mm (3.6 in). Output is 317 hp - 320 hp (227 kW) at 4900 rpm with 375 to 390 ft·lbf (509-522 Nm) of torque at 3600 rpm. It has aluminum-alloy block and heads and low-friction molybdenum-coated pistons. The valvetrain is a dual overhead cam (DOHC). It has 4 valves per cylinder with micro-finished camshafts and ductile iron cylinder liners for increased durability.

Motorsport

Nismo also uses the VK56DE for FIA GT1 racing. In race trim, it produces 600 horsepower and 479 pound-feet of torque.[4]

Applications:

2004–present Nissan Armada, 317 hp (236 kW)
2004–present Nissan Titan, 317 hp (236 kW)
2004–present Infiniti QX56, 320 hp (240 kW)
2008–present Nissan Pathfinder, 310 hp (230 kW)
2009 Nissan GT-R GT1, 600 hp (450 kW)
Note: the Titan numbers are for 87 octane fuel. The 320 hp (240 kW) number for the Infiniti was using premium (91 octane) fuel. Using 91 octane fuel equalized the hp number.
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Re: USA Nissan V8

Post by gq351 »

bogged wrote:Will it physically fit?
anything will fit if u want it bad enough :D :D
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: USA Nissan V8

Post by bogged »

gq351 wrote:
bogged wrote:Will it physically fit?
anything will fit if u want it bad enough :D :D
I'll drop the barina off tonight
Image
Posts: 1400
Joined: Thu Nov 11, 2004 12:20 pm
Location: Mackay - Outerlimits; more extreme than your mum!

Post by phippsey »

Is their pathfinder the same as ours???? Seams a bit of overkill to have a 5.6 in a Pathfinder., :D
moorey wrote:All that aside, I am yet to be convinced that RUFF is anything other than a maniacal arse hat.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Re: USA Nissan V8

Post by mkpatrol »

bogged wrote:
gq351 wrote:
bogged wrote:Will it physically fit?
anything will fit if u want it bad enough :D :D
I'll drop the barina off tonight
Image

:rofl: :rofl: :rofl: bogged brings teh funnay....
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

have a read up on the frontier site, i think the v8 fits into the D40/Frontier ok so a good chance it may fit the patrol.

http://www.clubfrontier.org/forums/index.php
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Re: USA Nissan V8

Post by gq351 »

bogged wrote:
gq351 wrote:
bogged wrote:Will it physically fit?
anything will fit if u want it bad enough :D :D
I'll drop the barina off tonight
Image
haha well within reason bogged :armsup: :armsup:
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

nah shell be right, just lengthen the engine bay :D see with enough steel u can make ne thing fit :)
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Thanks Bog your comments are appreciated!
not helpful, not tech, when you turn on your computer do you ask your self "how many people can I piss off today"

There is only one real petrol engine convention and that is the LS1
(in the large petrol class)
holden v8's (5L) are big, heavy, slow, uneconomical and common.

Advantages of a Nissan V8,
keep the Nissan theme,
something different,
good power
good torque
good economy

still need to find the bell housing pattern?

As for emissions if it was released in the States and complies with US laws then I see no real problem fitting it to a patrol. no different to a LS1
Living the dream on the hill that floods
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

patrol man wrote:T
still need to find the bell housing pattern?

As for emissions if it was released in the States and complies with US laws then I see no real problem fitting it to a patrol. no different to a LS1
What auto was behind the VK56?
If its the same 5spd behind the TB48, with out measuring. Thats gotta be a positive thing.
Similar to what people do with the VH45. As it almost has the same 4spd auto as the TD42, ZD30, TB42 & TB45.
THOUGHT FOR THE DAY....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

patrol man wrote:Thanks Bog your comments are appreciated!
not helpful, not tech,
bogged wrote:Will it physically fit?
Will it pass emissions?
Spares?
Thats not tech? bout as much "tech" as your post...
when you turn on your computer do you ask your self "how many people can I piss off today"
as long as its you... my day is a success.
Posts: 270
Joined: Sat Apr 29, 2006 6:03 pm
Location: Victoria

Post by TEAMRPM »

bogged wrote:
patrol man wrote:Thanks Bog your comments are appreciated!
not helpful, not tech,
bogged wrote:Will it physically fit?
Will it pass emissions?
Spares?
Thats not tech? bout as much "tech" as your post...
when you turn on your computer do you ask your self "how many people can I piss off today"
as long as its you... my day is a success.
bwahahahaa...

:rofl:
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

I loved to go fishing with Bruce...you wouldn't need any bait and he would just keep hauling 'em in.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

Would imagine it would fit a patrol if it fits a Navara. What computer would you run Standard or after market. Will the standard computer run just the engine. Or is it intergrated to the traction control, gear box, hill decent and other electrical gobbin.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Post by killalux »

I say go for it, Just cause no one has done it doesn't mean its not possible. The only thing i would want to check up on is if you will have issues with security running the factory ECU. Other than that should be able to run the engine standalone no worries.

I would not run aftermarket ECU, as you will have more headaches than its worth, and will require alot of tuning to meet emissions.

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

What have people been donig with the VH45 to fit to a patrol?
Who make the conversion plates for these?
the vehicles they run in the States are bigger than or market and with the tight fit of the VH the VK56 may prove to be a wide motor too.
Living the dream on the hill that floods
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

Did a bit of searching. Aparantly the the Titan runs a 5sp auto model number
RE5R05A.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Posts: 239
Joined: Sun Feb 15, 2004 5:36 am
Location: Maryland, USA

Post by XterraGuy »

Nissan uses the VK56 in the Pathfinder here in the US.
They also built a one-off Xterra with a Titan driveline: http://www.thenewx.org/forum/showthread.php?s=0&t=3333

There's a private project to swap a VK56 into a Frontier (Navara) documented here:
http://www.clubfrontier.org/forums/f11/ ... wap-43001/

Don't know if that's of any help. Personally, I'd go with the VH45 instead.
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests