Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how to make a winch bar for under $2

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

how to make a winch bar for under $2

Post by sheps »

got a bit bored today so i made a awesomely awesome winch bar. :mrgreen:
Image
Image
Image
Image
www.auszookers.com
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

i like your new approach angle :lol:

Hope those mounting brackets are going to be strong enough for a winch situation........mite be best kept to the other forum hey :armsup:

appsie
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Post by Mike E »

you should paint it in hammertone
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Hope your recovery points are load rated.....
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

i see you used cable ties. are they load rated or just the cheap one at bunnings?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Sweet i see youre using that new invisible winch cabling.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

Mike E wrote:you should paint it in hammertone
it is a flash hi-tec plastic, the color goes all the way through the bar.
Moph wrote:Hope your recovery points are load rated.....
i have a winch now so i don't need recovery points. ;)
brendan_h wrote:i see you used cable ties. are they load rated or just the cheap one at bunnings?
they are very flash ties, i originally used them to hold transformers to power poles.
PJ.zook wrote:Sweet i see youre using that new invisible winch cabling.
the cable is there i just lost the hook bit. i plan on pop riveting the cable to a tree when i need to winch. ;)
www.auszookers.com
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Post by Mike E »

you should of used those red coke crates they meet australian standards
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

If you turn the ones on the ends sideways.. they can double as Jerry can holders..

Hell, make a rear one to.. some of them flat ones for the roof, with the square ones inside it, and fill them with LPG bottles.. somehow hooked together.. run it down into the chamber or converter.. whatever is needed!
Last edited by foolsp33d on Fri Jul 10, 2009 5:25 pm, edited 1 time in total.
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Posts: 18
Joined: Sat Mar 07, 2009 9:22 pm

Post by laurient »

impact absorbing and recyclable. nice
Posts: 40
Joined: Fri Mar 18, 2005 7:10 am
Location: nsw

Post by crispy zook »

just what ive been looking for

if you could knock me up one ill pay top dollar
ln106,2.8td,efs,wt,35s,& more......
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

crispy zook wrote:just what ive been looking for

if you could knock me up one ill pay top dollar
i think the freight would be the killer
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Posts: 265
Joined: Mon May 02, 2005 9:54 pm
Location: NEWY

Post by weaves »

Santos wrote:
crispy zook wrote:just what ive been looking for

if you could knock me up one ill pay top dollar
i think the freight would be the killer
Not if you fill it with milk cartons first.
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

would it be legal in QLD? :finger:
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

This fellow may be interested in your product:

http://www.outerlimits4x4.com/ftopic148641.php

sell them for about $50 (+ P/H) I say, thats a massive profit margin ;) and cheap enough for certain people...
Wheeling on completely wicked angles, without even looking stable.
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

Highway-Star wrote:This fellow may be interested in your product:

http://www.outerlimits4x4.com/ftopic148641.php

sell them for about $50 (+ P/H) I say, thats a massive profit margin ;) and cheap enough for certain people...
lol that was the standard that i wanted to beat, and i think that i seceded.
:armsup:
www.auszookers.com
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

sheps wrote:
Highway-Star wrote:This fellow may be interested in your product:

http://www.outerlimits4x4.com/ftopic148641.php

sell them for about $50 (+ P/H) I say, thats a massive profit margin ;) and cheap enough for certain people...
lol that was the standard that i wanted to beat, and i think that i seceded.
:armsup:
:rofl:
Sheps a legend!
Wheeling on completely wicked angles, without even looking stable.
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

hmmmm well might work for a sierra.
wonder how we could make one and sell it to the jeep guys? it would obviously have to be fire rated
[quote="MissForby"]"I like Pillows. I'm not allowed anything hard" :D[/quote]
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
Posts: 445
Joined: Mon Feb 11, 2008 9:54 pm
Location: Perth

Post by PCRman »

danssurf82 wrote:hmmmm well might work for a sierra.
wonder how we could make one and sell it to the jeep guys? it would obviously have to be fire rated
Fire-smire. Its about strength. Take the uber-cable ties it uses. Anything that could keep a transformer stuck to a power pole has got to be tough. I've seen the movies, those robots are HUGE! :shock:
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

maybe use some old broken microwaves i always see them in rubbish collection, with some tie wire? or maybe for a jeep have a few fire extinguishes tie wired to the front, and back
[quote="MissForby"]"I like Pillows. I'm not allowed anything hard" :D[/quote]
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

Is that a 200LC or a zook under there...
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Highway-Star wrote:This fellow may be interested in your product:

http://www.outerlimits4x4.com/ftopic148641.php

sell them for about $50 (+ P/H) I say, thats a massive profit margin ;) and cheap enough for certain people...
Not to hang shit on poor old me3@... but hes up to his antics again! With Custom sidesteps which are glued on! http://www.lcool.org/forum/viewtopic.php?t=6421
Posts: 26
Joined: Thu Jan 31, 2008 8:12 am
Location: Bendick Murrell, NSW

Post by DieselZook »

I like it! And as a bonus, you get extra safety. You've doubled your crumple zone. Just one question. Is it airbag compatible?
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

i took it for a road test today, and well to say it was a failure would be a understatement.
oh well back to the drawing board. :lol:

next i am going to try plywood, i recon it would look good varnished.
www.auszookers.com
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

I had a mate, who had a polished railway sleeper. On the front of his 77 mod Daihatsu, looked ok till he hit a 120y datto. :lol:
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 240
Joined: Sun May 13, 2007 9:05 pm
Location: Medowie

Post by ZUKPOWER »

PCRman wrote: Anything that could keep a transformer stuck to a power pole has got to be tough. I've seen the movies, those robots are HUGE! :shock:
:rofl: :rofl: :rofl:
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

ZUKPOWER wrote:
PCRman wrote: Anything that could keep a transformer stuck to a power pole has got to be tough. I've seen the movies, those robots are HUGE! :shock:
:rofl: :rofl: :rofl:
iu think he mean transformers as in power. no robots :P
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

brendan_h wrote:
ZUKPOWER wrote:
PCRman wrote: Anything that could keep a transformer stuck to a power pole has got to be tough. I've seen the movies, those robots are HUGE! :shock:
:rofl: :rofl: :rofl:
iu think he mean transformers as in power. no robots :P
it would make a better story if it was robots. ;)
www.auszookers.com
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

Post by 83jack »

brendan_h wrote:
ZUKPOWER wrote:
PCRman wrote: Anything that could keep a transformer stuck to a power pole has got to be tough. I've seen the movies, those robots are HUGE! :shock:
:rofl: :rofl: :rofl:
iu think he mean transformers as in power. no robots :P
are you sure??? i swear my zook is alive, everytime i take it out it just wants to ly down and have a sleep...
cheers
simon
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

u got way too much time on ur hands
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests