Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Probably covered 1 million times before, but...

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Probably covered 1 million times before, but...

Post by mike_nofx »

Are WT and NT 1.3 diff centres the same, as far as for fitting a lockright go?

(sorry, couldnt find the info in a search!)

Thanks
Mike
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

Are you talking about 1.3 NT and 1.3WT being the same or just about fitting lockers? A lockright will fit any zook diff im pretty sure even 2 pinions. shep will back that up...
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

31zook wrote:Are you talking about 1.3 NT and 1.3WT being the same or just about fitting lockers? A lockright will fit any zook diff im pretty sure even 2 pinions. shep will back that up...
yep the lockright without coupler will fit a wt 2 pin diff
www.auszookers.com
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Yes 1.3 NT and 1.3 WT.

So they are the same...

Thanks
Top
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Is there likely to be any difference in diff strength running 2 pinion vs 4 pinion? Only because I have a 4 pinion rear diff centre here that I could mix 'n match with my 2 pinion front diff centre to end up with a 4 pinion front.... not sure if it's best to do that though or just install the locker as 2 pinion??? :?
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

Moph wrote:Is there likely to be any difference in diff strength running 2 pinion vs 4 pinion? Only because I have a 4 pinion rear diff centre here that I could mix 'n match with my 2 pinion front diff centre to end up with a 4 pinion front.... not sure if it's best to do that though or just install the locker as 2 pinion??? :?
will defo be stronger with 4 pinion. Just pull both diffs apart and put the front side gears in the rear diff. Or even better just runa complete rear diff in the front with chromos and a lokka :D
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

kEEP IN MIND lOCKRIGHTS CAN BE EXTREMELY TEMPREMENTAL... Damnit caps lock - im not typing all that again...

Anyway once I got my lockright installed I went from enjoying driving my zuk to hating it. Replacing the lockright with an airlocker was the best mod I have done.


You have been warned!
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

lump_a_charcoal wrote:kEEP IN MIND lOCKRIGHTS CAN BE EXTREMELY TEMPREMENTAL... Damnit caps lock - im not typing all that again...

Anyway once I got my lockright installed I went from enjoying driving my zuk to hating it. Replacing the lockright with an airlocker was the best mod I have done.


You have been warned!
It should read..."Be warned if it's not set up right"

A lockrite set up correctly and driven accordingly will be fine on the road. Those that whinge about them mustn't be setting them up right. Mine was sweet on the road. Don't have issues like airlines being ripped out and other associated factors with an airlocker. I have lockrite rear, airlocker front...Good combo.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

It was set up right, but anything like a slightly bent axle or a difference in tyre diameter can make them misbehave...

I don't doubt that there are thousands in use with no issues, just relaying my bad experience.

PS I have a lockright for sale in a 5.12 rear sierra diff...
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

in the front - make sure u got power steer or like to hang off the wheel
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

lump_a_charcoal wrote:kEEP IN MIND lOCKRIGHTS CAN BE EXTREMELY TEMPREMENTAL... Damnit caps lock - im not typing all that again...

Anyway once I got my lockright installed I went from enjoying driving my zuk to hating it. Replacing the lockright with an airlocker was the best mod I have done.


You have been warned!
x2. i had a lockright in my first zook when i bought it. broke the pins twice. got sick of driving it ( doing a 160km RT to work everyday). when i eventually bit the bullet and bought an air locker even my wife was happy with the improvement for the money. i guess if you had a lockright laying in your toolbox as as ornament you might put it on but i personally would NEVER spend money on a lockright, to me your nearly halfway to buying you air locker and you will be more than twice as happy.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

I had an auto lokka in the rear. It was sucked but i then found that one of my thrust washers had died so that was why it was clicking when i changed gears. Tyre pressure makes heaps of difference! and being smooth through corners... all my problems made me change back to an open diff... but you won't have those problems in the front...
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

i would like to replace the lockright in my rear diff, but the front is fine.

mine randomly leaps sideways, luckily there is no traffic where i live does suck
a bit when towing a trailer though.
www.auszookers.com
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

I had to ask the Q because i am selling one, (one i bought for a WT, but never fitted) and someone asked if it would fit an NT.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0328709379

Thanks Guys
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

sheps wrote:i would like to replace the lockright in my rear diff, but the front is fine.

mine randomly leaps sideways, luckily there is no traffic where i live does suck
a bit when towing a trailer though.
You need to shim it up. To get the correct shim count you need a dial gauge to measure the amount of movement inside the lockwrong. it takes time but from what i've heard its well worth it. I saw a dial gauge and magnet stand for $50 the other day... will buy it soon enough
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

31zook wrote:
sheps wrote:i would like to replace the lockright in my rear diff, but the front is fine.

mine randomly leaps sideways, luckily there is no traffic where i live does suck
a bit when towing a trailer though.
You need to shim it up. To get the correct shim count you need a dial gauge to measure the amount of movement inside the lockwrong. it takes time but from what i've heard its well worth it. I saw a dial gauge and magnet stand for $50 the other day... will buy it soon enough
it has done about 50000ks so i expect that it would be getting a bit worn. next
time i pull the diff apart will be to stick a air locker in. ;)
www.auszookers.com
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

sheps wrote:
31zook wrote:Are you talking about 1.3 NT and 1.3WT being the same or just about fitting lockers? A lockright will fit any zook diff im pretty sure even 2 pinions. shep will back that up...
yep the lockright without coupler will fit a wt 2 pin diff
Can a lockright with couplers to suit 26 spline chromo front axles still fit a 2pin front diff or not?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

GRPABT1 wrote:
sheps wrote:
31zook wrote:Are you talking about 1.3 NT and 1.3WT being the same or just about fitting lockers? A lockright will fit any zook diff im pretty sure even 2 pinions. shep will back that up...
yep the lockright without coupler will fit a wt 2 pin diff
Can a lockright with couplers to suit 26 spline chromo front axles still fit a 2pin front diff or not?
dont see why not. if i pull my finger out and stick an air locker in i will see if
the locker will fit in one of my spare diffs.
www.auszookers.com
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

what about sj40 or sj410? Same lockright part?
Top
Posts: 83
Joined: Tue May 25, 2004 1:49 pm
Location: Southern Tasmania

Post by Pat Murray »

Dare I say there is a little too much negativity about LockRights? I may just be fortunate, but have been running a pair of 'em for over 160,000 km. now with absolutely no dramas. And the rear was secondhand when I bought it! Whatever works for each person, I guess.
Happiness is life in low range!
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Negative is usually from those who have just forked out thousands for air lockers!

Personally i love the welded lockers!! only cost as much as a few electrodes and a spare arvo.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 55 guests