Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TIGERZ II WINCHES any good
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Anyone know if there's much of a physical size difference between these 12,000lb Tigerz and all the typical 9000lb winches for sale (ie Ironman etc)?
I'm keen on the Tigerz for the money purely for the 20kg weight difference with plasma rope, but 12000 is a big fk off winch for a 4Runner (though it is getting fat)
I'm keen on the Tigerz for the money purely for the 20kg weight difference with plasma rope, but 12000 is a big fk off winch for a 4Runner (though it is getting fat)
Last edited by -Nemesis- on Mon Sep 14, 2009 11:37 am, edited 1 time in total.
Lovin the FZJ105-T, bling by Ryano
Im here for the sausage!
im happy to swap you for my 10,000lb tigerz11?-Nemesis- wrote:Anoyong know if there's much of a physical size difference between these 12,000lb Tigerz and all the typical 9000lb winches for sale (ie Ironman etc)?
I'm keen on the Tigerz for the money purely for the 20kg weight difference with plasma rope, but 12000 is a big fk off winch for a 4Runner (though it is getting fat)
the 12000lb wasnt available at my time of purchase.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
There can't be much difference. I just fitted a Tigerz11 12,000lb to a factory bar on a GU with no issues, except i had to flip the winch (upside down) for the holes and fairlead to line up properly. The drum still pulls from the correct side.-Nemesis- wrote:Anyone know if there's much of a physical size difference between these 12,000lb Tigerz and all the typical 9000lb winches for sale (ie Ironman etc)?
I'm keen on the Tigerz for the money purely for the 20kg weight difference with plasma rope, but 12000 is a big fk off winch for a 4Runner (though it is getting fat)
So basically when the winch is new (unused) with the rope spooled on, you have to respool it again before you use it??, and the black heat shrink near the hook should be threaded down the rope and put on the first run of rope clsest to the drumm and when respooling it should be done under load, and on a 30 deg angle???
oops i better read the instructions . the missus said i was meant to respool it i just fobbed her offpaulm958 wrote:So basically when the winch is new (unused) with the rope spooled on, you have to respool it again before you use it??, and the black heat shrink near the hook should be threaded down the rope and put on the first run of rope clsest to the drumm and when respooling it should be done under load, and on a 30 deg angle???
set your limits way beyond your ability
member of COR4x4
member of COR4x4
yes re spool it so it(you should do this regardless of whether it is wire or synthetic rope, re spool under load otherwise it can tighten up when you use it the first time and the top layer gets pulled thru to the drum and gets caught up.)paulm958 wrote:So basically when the winch is new (unused) with the rope spooled on, you have to respool it again before you use it??, and the black heat shrink near the hook should be threaded down the rope and put on the first run of rope clsest to the drumm and when respooling it should be done under load, and on a 30 deg angle???
also, the heat shrink at the hook end, stays at the hook end. the drum end already has a protective sheath over it. that big lump of heat shrink at the hook is easier to handle than the rope i find, and its where it is most likely to get damaged.
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Bronwyn Bishop does it for me.[/quote]
Geez dont you hate it when the Missis is right!!!!!!!!!!blade 929 wrote:oops i better read the instructions . the missus said i was meant to respool it i just fobbed her offpaulm958 wrote:So basically when the winch is new (unused) with the rope spooled on, you have to respool it again before you use it??, and the black heat shrink near the hook should be threaded down the rope and put on the first run of rope clsest to the drumm and when respooling it should be done under load, and on a 30 deg angle???
Thanks for the reply Macc81 greatly appreciated
the chinese rate thier winches differently to the americans. a warn 12000 is huge, a chinese 12000 is the same as a warn 9000 in size. you will find all of these winches don't pull thier rated loadings.-Nemesis- wrote:Anyone know if there's much of a physical size difference between these 12,000lb Tigerz and all the typical 9000lb winches for sale (ie Ironman etc)?
I'm keen on the Tigerz for the money purely for the 20kg weight difference with plasma rope, but 12000 is a big fk off winch for a 4Runner (though it is getting fat)
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
the chinese pull less a there is less to pull...roverrat wrote:so the chinese pull less than the yanks?? its that why there is a size difference!????!?!?!
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Wondered why Hobzees auctions had gone. I would hurry but I need someone to buy my air locker first!jasonw wrote:be quick if you want one, tigerz themselves have sold out of these. i know patrolapart has one more left other than that the odd shop mave have one still. the next load is due in mid oct
Lovin the FZJ105-T, bling by Ryano
Re: new stock
how much new stock?? will demand be met by supply? seems like your winches are very popular mate. its next on my list when i get back from malaysia in novembertigerz11 wrote:i am in china now new stock left today and wont arrive until october 7th
paul
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Bronwyn Bishop does it for me.[/quote]
Re: new stock
stoclk will be kept up from now on,,price samemacca81 wrote:how much new stock?? will demand be met by supply? seems like your winches are very popular mate. its next on my list when i get back from malaysia in novembertigerz11 wrote:i am in china now new stock left today and wont arrive until october 7th
paul
this is the same modelBowTieGQ wrote:New models or features Paul? Anything else new with them or same as previous ones?
the new 2010 model will be finished january we hope ,,,new clutch on the same idea as the premier ,,working on a break in either the gear box or motor ,our only comcern is the lenght of the winch ,we must make it viable for every bullbar,,so we will see ,,the brake now is very good ,,for rope its not fully complete ,but we dont have any problems with rope ,,new solenoid,,better than what people call the heavy duty one ,which is still ok,, and then the new 9000lb winch ,which i discussed on the forums 12months ago ,,,2 speed winch,,28 mtres per min line pull with no load,its in this gear ratio for up to 3000lb ,,which means it really wont pull a vehicle ,,has setbacks with that ,,but quality winch ,,when pulling line speed is comparison with better winches ,, another winch company has ask us to try and get the ball rolling with this winch,,,
paul
Who is online
Users browsing this forum: No registered users and 0 guests