Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

[FEROZA] Underbonnet question: what are these plugs for?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

[FEROZA] Underbonnet question: what are these plugs for?

Post by wacky »

UPDATE: I should have checked the manual first, am currently reading the Harness/Wiring one and it gave me some of the info I needed - see below.

Hey all,

Just sitting here wondering what these few plugs are supposed to connect to under my bonnet/hood, in case they're important :)

Firstly, we have a 2-wire blue plug on the exhaust-side of the firewall, to the left of the green diagnostic plug - I can't see what its meant to go to, maybe someone can help. Click the images for larger version

Image

Secondly, we have a single plug with a yellow wire, hanging at the rear of the engine, above the bellhousing on the exhaust side - I'm hoping this isn't to my coolant-temp sensor (?).

Image

Lastly, 3 things I'm unsure of in one place: located behind the passenger-side headlight. A 2-wire brown oval-shaped plug, a large white plastic 10-pin connector and 3 red wires with varying colours on them (which a previous owner has cut and taped together).

Image
2 of 3 ID'd: Brown plug is A/C Pressure switch, 10-pin connector is to A/C Pump

Any ideas? Thanks in advance to any replies, and perhaps others have some "odd wires" they need help ID'ing - ask here.

Cheers guys,
wacky
Last edited by wacky on Fri Nov 20, 2009 1:05 pm, edited 3 times in total.
Posts: 306
Joined: Fri Oct 10, 2008 4:02 pm
Location: Hobart, Tasmania

Post by tas80 »

Do they look like they've ever been connected to anything, a lot of cars will have a few plugs in the engine bay that aren't connected to anything so that the wiring loom can be kept pretty standard between pov pack and top of the line models.
For example my 100 series diesel probably has at least 10 plugs like this.
100 Series Ute: Chopped, Locked and Rolled
GU Ute: Lotsa Good Stuff!
RIP UTED100, Hello GU Ute
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

The 3 red ones behind the passenge side headlight have been cut by previous owner and covered with tape then heatshrink, unsure what they went to.

Mine is an 1989 "EL", unsure if it was supposed to have aircon fitted but I was thinking maybe thats what a few of the wires are/were for.
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Post by phraze84 »

Im pretty sure ive got the same things from pic 1 & 2... the headlight thing i dont have.

i also donthave any idea what they are for!
I got a sweater for Christmas... I wanted a screamer or a moaner!
Posts: 146
Joined: Thu Jan 12, 2006 5:47 pm
Location: Slovenia

Post by nebivedu »

Those things at headlights are automatic setting of lights height. There is a place (a hole) on dashboard for potentioneter that sets the height of lights. It is at the same height as the thing that open bonnet , but on oposite side of steering wheel.
I do not need sex, the government fucks me every day!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests