Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series height on the road

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 8
Joined: Sat Oct 24, 2009 12:03 pm
Location: Melb

100 series height on the road

Post by chubbers001 »

I have a 100 series 2006 TD - bought 2nd hand - and I think it has been raised in the rear or lowered in the front ( I dont know why) . Does any one know the standard height from the center of the hubs to the bottom of the wheel arch front and rear, I would think the measurement would be from the center of the hub to over come the different height of tyres that can be put on[
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

Sorry not sure on the measurements but the IFS trucks seem to sit lowrt in the front. Does it have any extra's which may add to the nose dive?
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 8
Joined: Sat Oct 24, 2009 12:03 pm
Location: Melb

Post by chubbers001 »

BUSTED100 wrote:Sorry not sure on the measurements but the IFS trucks seem to sit lowrt in the front. Does it have any extra's which may add to the nose dive?
The only extra on the front is a standard ARB bull bar with 1 set of driving lights, no winch or PTO or any other heavy device.
Sorry IFS ?
Top
Posts: 8
Joined: Sat Oct 24, 2009 12:03 pm
Location: Melb

Post by chubbers001 »

chubbers001 wrote:
BUSTED100 wrote:Sorry not sure on the measurements but the IFS trucks seem to sit lowrt in the front. Does it have any extra's which may add to the nose dive?
The only extra on the front is a standard ARB bull bar with 1 set of driving lights, no winch or PTO or any other heavy device.
Sorry IFS ?
Got it IFS I had to think about it, I am new to accronims.
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

when I had the 100 series I put in a set off H/D torsion bars (wound them up a little) to take the weight and it sat flatter and felt a sh!t load better to drive with the firmer bars in. I also had steel ARB bar and a winch out front.
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 27
Joined: Mon Jan 17, 2005 9:28 pm
Location: Brisbane

Post by wholehog »

Thats it, get some decent torsion bars under the front, Toyota springs of any desription are shyte from the factory.

Get the wheel alignment done also if you make any changes to an IFS front end.
105 T/D Belmont Landcruiser.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 11 guests