Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help IDing a transfer case/gearbox

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Help IDing a transfer case/gearbox

Post by zombie_response_team »

Hi all. Just wondering if someone coud give me a hand to identify the 5 speed and transfer case that was installed in my FJ40

This is a really bad pic of the rear of the case incase someone here recognises it;

Image

I'm told its a 5 speed out of a another series cruiser but I'm not sure how to tell specificly. Are there any stamps or markings I should be looking for?
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

A wild stab in the dark .......... 60 series cruiser
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Hook your speedo cable up mate.

Its from a 1984-1989 60 series or 1985-1989 75 series.

Standard H55F
hands and mums dont count!!!
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

Thank all.

My next question is did the 84-89 60s come with a transfercase mounted handbrake? Alternativly does anyone know of a suitable disc brake kit for a H55F?

I'm running a 75 FJ40 with the non parking brake drum rear. Just looking for options to get one in.

EDIT: After some more reading it seems that I am able to install 60 series rear drum brake assembly (with parking brake) straight onto my fully floated 40 rear.

Can anyone confirm this for me?
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

zombie_response_team wrote:Thank all.

My next question is did the 84-89 60s come with a transfercase mounted handbrake? Alternativly does anyone know of a suitable disc brake kit for a H55F?
I have one its a disc handbrake for your tailshaft and it comes with caliper and cable etc. $350
hands and mums dont count!!!
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

zombie_response_team wrote:
EDIT: After some more reading it seems that I am able to install 60 series rear drum brake assembly (with parking brake) straight onto my fully floated 40 rear.

Can anyone confirm this for me?
Nope, won'y fit, and its a pain in the ass, the housing has four bolts holding the drum backing plate on and yours has 8.
hands and mums dont count!!!
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

bj on roids wrote: I have one its a disc handbrake for your tailshaft and it comes with caliper and cable etc. $350
Did you mean you have one for sale, or have on on your 40?

Is it a universal type kit that bolts to any toyota tailshaft or is it specificly for a H55F?

Cheers.
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

could drop a whole 60 rear diff in????
i think they are a bit wider but could always do the front at the same time
the disc handbrake that bj mentioned sounds like the go IMO
just my 2c
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

I agree mate, and I think that will be the way to go.

Using the 60 diffs isn't really an option for me and up here to get anything wider than 50mm over standard approved involves alot of painful and expensive testing, and I'm already close to that limit running my 38s.

I might look at a wider diff swap down the track once it's all re-engineered and the scalies aren't going over it with a fine tooth comb. :)
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

pity it has to be engineered....
i had 60s under my hilux and got a defect from vic roads for something else rwc and vicroads didnt pick that they were not the original diffs or neither cared :armsup:
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

Yeah. Like i said after its all been done I have no doubt that a diff swap would go unnoticed, but for now they are intent on measuring and checking everything, so im playing by the rules as best as I can.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

zombie_response_team wrote:
bj on roids wrote: I have one its a disc handbrake for your tailshaft and it comes with caliper and cable etc. $350
Did you mean you have one for sale, or have on on your 40?

Is it a universal type kit that bolts to any toyota tailshaft or is it specificly for a H55F?

Cheers.
for sale and definitely fits the H55F
hands and mums dont count!!!
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

Awesome! I'm very interested. Do you have pic/link to the setup I can have a look at?

I assume being a disc setup up it doesnt collaps the tailshaft much.
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Didnt the HJ47 get a splitcase with driveshaft drum handbrake?

Discs work well till they take a hit and get warped, then theyre useless..
Posts: 31
Joined: Wed Nov 25, 2009 1:47 pm
Location: Northern Territory

Post by zombie_response_team »

vk7ybi wrote:Didnt the HJ47 get a splitcase with driveshaft drum handbrake?

Discs work well till they take a hit and get warped, then theyre useless..
Yeah I realise the issues that come with the disc setups, but this is honestly only to appease registration requirments, as for any situation where I actually need a handbrake I have a hydrolic brake that I bought to go in. I had hoped to 'get away' with just using it, but like I said... they are using a fine tooth comb lol
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Help IDing a transfer case/gearbox

Post by RAY185 »

No. Later model 60 series had the vacuum operated 2wd-4wd transfer shifter via switch. It didn't come out in the FJ40 but it can be fitted to one.
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Help IDing a transfer case/gearbox

Post by SCANAS »

Your running 38's but your worried that a 50mm wheel track increase might tip the Pow lease off?
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re:

Post by Shadow »

vk7ybi wrote:Didnt the HJ47 get a splitcase with driveshaft drum handbrake?

Discs work well till they take a hit and get warped, then theyre useless..
my fj45 has drum brake split case transfer
03 HDJ100R GXL / 94 FJ45-80
Posts: 190
Joined: Mon May 12, 2008 11:54 am
Location: nsw

Re:

Post by poppywhite »

vk7ybi wrote:Didnt the HJ47 get a splitcase with driveshaft drum handbrake?

Discs work well till they take a hit and get warped, then theyre useless..
agree that disc with bend or chip is no good

My '47 had the drum park brake and it was ok (much better than the range rover drum park brake)
It was hooked up to 4 sp dont know about splitcase
Post Reply

Who is online

Users browsing this forum: No registered users and 63 guests