hey all,
can anyone point me in the right direction, i have a 1986 hilux 4x4 and to get it engineered i need to find out the original bump stop distance.
then i have to submit the application for modifycation with the origanal distance and the new lifted distance to get it passed as a certain amout of lift.
sorry if i have confused anyone but it makes scense to me.
Gavin
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
factory bump stop clearance
Moderators: toaddog, Elmo, DUDELUX
Gav
When I was getting the paperwork ready for the 80 series I gave transport a call, the number for the correct department is on the bottom of the modification application form, they can give you the measuremnt from the centre of the axle to the bottom lip of the gaurd, they'll probably have the bumpstop spacing on the computer too, at least this way you'll be working off the same figures they use come inspection time.
Syksey
When I was getting the paperwork ready for the 80 series I gave transport a call, the number for the correct department is on the bottom of the modification application form, they can give you the measuremnt from the centre of the axle to the bottom lip of the gaurd, they'll probably have the bumpstop spacing on the computer too, at least this way you'll be working off the same figures they use come inspection time.
Syksey
Who is online
Users browsing this forum: No registered users and 12 guests