Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

factory bump stop clearance

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

factory bump stop clearance

Post by Bagdad mafia »

hey all,

can anyone point me in the right direction, i have a 1986 hilux 4x4 and to get it engineered i need to find out the original bump stop distance.

then i have to submit the application for modifycation with the origanal distance and the new lifted distance to get it passed as a certain amout of lift.

sorry if i have confused anyone but it makes scense to me.

Gavin
Posts: 139
Joined: Wed Jun 18, 2008 7:51 pm
Location: NSW

Post by highwaychook »

Interesting one mate. How high did you lift it ?
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

i havent lifted it at all yet untill i get the standard measurement

otherwise i may not be able to get it passed if i lift it to high
Posts: 306
Joined: Fri Oct 10, 2008 4:02 pm
Location: Hobart, Tasmania

Post by tas80 »

Gav
When I was getting the paperwork ready for the 80 series I gave transport a call, the number for the correct department is on the bottom of the modification application form, they can give you the measuremnt from the centre of the axle to the bottom lip of the gaurd, they'll probably have the bumpstop spacing on the computer too, at least this way you'll be working off the same figures they use come inspection time.
Syksey
100 Series Ute: Chopped, Locked and Rolled
GU Ute: Lotsa Good Stuff!
RIP UTED100, Hello GU Ute
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

hey mark how are you ?

i rang them but they said they dont have the measurements for a hilux so i got to supply them on the application.

i could always just make it up so i can get 4-6inch lift
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Toyota chassis and body repair manual for your vehicle will have the info you are after.

I got one for the 4 Runner for $80 on the net.

Cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests