Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
blown 2.8. replace with 4.2... worth it??
blown 2.8. replace with 4.2... worth it??
hey guys n galls,
i can get a family friend's 2.8 GU that he has blown up for 4k its completly standard with power windows ect. i wanna know if it is worth me pickin it up n putin my busted arse gq's 4.2 turbo deisel in it?
how much work is involved? i'd have 2 complete cars so i should have all the parts needed?
cheers
steve
i can get a family friend's 2.8 GU that he has blown up for 4k its completly standard with power windows ect. i wanna know if it is worth me pickin it up n putin my busted arse gq's 4.2 turbo deisel in it?
how much work is involved? i'd have 2 complete cars so i should have all the parts needed?
cheers
steve
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
tree mended guards
Re: blown 2.8. replace with 4.2... worth it??
theres about 500 threads on whats involved.
I'd say go for it... but offer em 3000
I'd say go for it... but offer em 3000
i just replaced my 2.8 gq for a td42t out of gu.
engine mount on drivers side about 12mm further out and 40mm further back towards firewall (thats if eng. mounts on rd28t and rd28ti are the same)
gear levers in the GU's are set a bit further back, so some modding will need to be done there.
i was lucky enough to use the 2.8 loom on the 4.2 but in your case i think the 2.8 GUs have that electronic injection crap so that might cause a headache.
you should have all the parts needed but ill agree with bogged and say offer them 3k
engine mount on drivers side about 12mm further out and 40mm further back towards firewall (thats if eng. mounts on rd28t and rd28ti are the same)
gear levers in the GU's are set a bit further back, so some modding will need to be done there.
i was lucky enough to use the 2.8 loom on the 4.2 but in your case i think the 2.8 GUs have that electronic injection crap so that might cause a headache.
you should have all the parts needed but ill agree with bogged and say offer them 3k
Re: gu
As long as I am in front.....bogged wrote:I reckon there would be people lining up to buy it!!!!purplebus wrote:if you decide against it let me know as I may be able to sell the truck for them.
only the first roll hurts, then its a ride..
Who is online
Users browsing this forum: No registered users and 139 guests