Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

blown 2.8. replace with 4.2... worth it??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 612
Joined: Mon Nov 20, 2006 9:32 pm
Location: sunny coast

blown 2.8. replace with 4.2... worth it??

Post by shw337 »

hey guys n galls,

i can get a family friend's 2.8 GU that he has blown up for 4k its completly standard with power windows ect. i wanna know if it is worth me pickin it up n putin my busted arse gq's 4.2 turbo deisel in it?

how much work is involved? i'd have 2 complete cars so i should have all the parts needed?

cheers
steve
89 4.2tdt pootrol,w-a,3inch spring,bar-reparing,83%ers,4.6, arb front & noslip rear, 35's
tree mended guards
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: blown 2.8. replace with 4.2... worth it??

Post by bogged »

theres about 500 threads on whats involved.


I'd say go for it... but offer em 3000 :)
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

I would do it.

Could have yourself a nice tourer for under 10k
GQII Patrol YAY!!
Posts: 237
Joined: Sun Dec 06, 2009 2:03 pm
Location: QLD

Post by nerida67 »

alot of work if u did
save yourself the headache and by one finished
unless your capable to do it
as said u could buy a fairly good one for around 10k
Posts: 117
Joined: Mon Feb 07, 2005 3:27 pm
Location: kerang vic

Post by PigDog »

go for it as long as u can do the work or are willing to give it a go and are prepaid for the expence of getting some one 2 finish it off if u don't.
nerida67 if u can find a good gu td4.2t for around 10 let me know
Posts: 212
Joined: Tue Jan 19, 2010 10:35 pm
Location: Brisbane

Post by TroopiePete »

Sounds like a Fantastic project, good luck.
Just wished I had the place to do work like this.
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Banned
Posts: 11
Joined: Mon Nov 09, 2009 3:35 pm
Location: Newcastle

Post by gbaker181 »

i just replaced my 2.8 gq for a td42t out of gu.
engine mount on drivers side about 12mm further out and 40mm further back towards firewall (thats if eng. mounts on rd28t and rd28ti are the same)
gear levers in the GU's are set a bit further back, so some modding will need to be done there.
i was lucky enough to use the 2.8 loom on the 4.2 but in your case i think the 2.8 GUs have that electronic injection crap so that might cause a headache.
you should have all the parts needed but ill agree with bogged and say offer them 3k
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

gu

Post by purplebus »

if you decide against it let me know as I may be able to sell the truck for them.
only the first roll hurts, then its a ride..
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: gu

Post by bogged »

purplebus wrote:if you decide against it let me know as I may be able to sell the truck for them.
I reckon there would be people lining up to buy it!!!!
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

Re: gu

Post by purplebus »

bogged wrote:
purplebus wrote:if you decide against it let me know as I may be able to sell the truck for them.
I reckon there would be people lining up to buy it!!!!
As long as I am in front..... :lol:
only the first roll hurts, then its a ride..
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: gu

Post by bogged »

purplebus wrote:
bogged wrote:
purplebus wrote:if you decide against it let me know as I may be able to sell the truck for them.
I reckon there would be people lining up to buy it!!!!
As long as I am in front..... :lol:
:rofl: :rofl: :lol: :lol: :rofl: :lol: :armsup:
Post Reply

Who is online

Users browsing this forum: No registered users and 102 guests