Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

biggest tyres 4.625 ratio's will handle

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 639
Joined: Mon Mar 12, 2007 10:07 am
Location: Not where you are/foot hills of the Watagans

biggest tyres 4.625 ratio's will handle

Post by OGJON »

hey my terracan is running the 4.625 diff ratios
I'm currently running 32" muddies without any complaints from the diffs, gearbox or engine, in fact the engine doesn't even seem to notice them @ all

just wondering what is the biggest tyre size that the 4.625's will handle??
'98 4.5L GU ST Auto - lifted, 35's, re-geared, custom rock sliders,M winchbar, some custom parts & more to come.
V8 pajero comp truck
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Manual or auto ?
I just luv my "clacker Jabber"
Posts: 639
Joined: Mon Mar 12, 2007 10:07 am
Location: Not where you are/foot hills of the Watagans

Post by OGJON »

sorry about that
it's a 3.5L V6 petrol auto, LSD rear
with"
2" suspension lift
2" body lift
no rear swaybar

to run anything bigger than my current 32"s I know I will have to do a fair bit of guard trimming(as it is 32"s only just touch/rub the guards under full flex, but don't get any scrubbing when turning)
33"s fit & drive ok but they scrub a bit on full steering(didn't try flex, but wouldn't expect to get much)
35"s also only just fit but scrub like mad when driving & cannot steer

I was thinking of running 33"s or 35"s for my next set when the 32"s wear out to get a bit extra diff clearance as I've been driving more & more rocky tracks
'98 4.5L GU ST Auto - lifted, 35's, re-geared, custom rock sliders,M winchbar, some custom parts & more to come.
V8 pajero comp truck
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

IMO 33"s with a SOHC 3.5 would be about it.
Heaps of guys in the US run these but the ones that go to 35"s run 4.90's from the 2.8TDI.
I just luv my "clacker Jabber"
User avatar
pjb
Posts: 103
Joined: Thu Sep 24, 2009 8:59 am
Location: North Shore City, New Zealand

Post by pjb »

I've got 33" on mine (same car/engine/diff ratio). It's _okay_, I'll be looking for some 4.90 gear soon though I think. It's a bit sluggish off the mark, and there is very little engine braking for hill decents, but otherwise the torque converter makes up for a lot.

Incidentally, I've got 33x12.5", 30 mm body lift and 40 mm suspension lift and full clearance of the tyres. I am running -24 mm offset though. However, I think I'd still have clearance at -17 mm offset.
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests