Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Whay did you change the wheels\tyres to larger ones mid chop ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
just can't believe my eyes you did this to a LWB something new to see here. imho, i think you should reserved 5-6" before the pillar to make a nice and proportional looking cab. it seems too short for a LWB chop. just my 2 cents.
Right, I don't want much cab, and i was going to do a small extended cab but after thinking it over i went with short. It was easier and i'll have more bed room, The reason for larger tires mid chop was my brother in law needed new tires for his truck so we traded his bad tires and wide wheels for my better small tires and stock wheels. One of his wheels was messed up but i got that fixed so now i got a new set of wheels to fit some monster tires on.
toastmaster wrote:Right, I don't want much cab, and i was going to do a small extended cab but after thinking it over i went with short. It was easier and i'll have more bed room, The reason for larger tires mid chop was my brother in law needed new tires for his truck so we traded his bad tires and wide wheels for my better small tires and stock wheels. One of his wheels was messed up but i got that fixed so now i got a new set of wheels to fit some monster tires on.
Fair enough .. you going to put a solid axle in it ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
yeah eventually it'll go SAS, for now i just want to get the chop done and the new engine swapped in. Here's yesterdays progress, capped the body corners.
Is there going to be anything more going back to the chassis where the roll cage meets the flat bed frame.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "