Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Another CHOP!

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Another CHOP!

Post by toastmaster »

Here's mine so far
Image Image Image Image Image Image Image Image Image Image

Long ways to go but i'm really happy with it so far
Sneaky ninja action!
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

something different nice
94 Patrol Petrol 3.0L lift, tyres, winch
90 WT Serria locked diff, Muddies
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Stupid question time ..

Whay did you change the wheels\tyres to larger ones mid chop ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 92
Joined: Wed Aug 05, 2009 3:35 am
Location: Kuala Lumpur

Post by iwan »

just can't believe my eyes you did this to a LWB :shock: :shock: something new to see here. imho, i think you should reserved 5-6" before the pillar to make a nice and proportional looking cab. it seems too short for a LWB chop. just my 2 cents. ;)
Top
Posts: 53
Joined: Sun May 10, 2009 2:49 pm
Location: Kansas USA

Post by Spicoli »

We never got shorties in the states Iwan. So its lwb or none at all.
Top
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

Right, I don't want much cab, and i was going to do a small extended cab but after thinking it over i went with short. It was easier and i'll have more bed room, The reason for larger tires mid chop was my brother in law needed new tires for his truck so we traded his bad tires and wide wheels for my better small tires and stock wheels. One of his wheels was messed up but i got that fixed so now i got a new set of wheels to fit some monster tires on. :D
Sneaky ninja action!
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

toastmaster wrote:Right, I don't want much cab, and i was going to do a small extended cab but after thinking it over i went with short. It was easier and i'll have more bed room, The reason for larger tires mid chop was my brother in law needed new tires for his truck so we traded his bad tires and wide wheels for my better small tires and stock wheels. One of his wheels was messed up but i got that fixed so now i got a new set of wheels to fit some monster tires on. :D
Fair enough .. you going to put a solid axle in it ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

yeah eventually it'll go SAS, for now i just want to get the chop done and the new engine swapped in. Here's yesterdays progress, capped the body corners.
Image
Sneaky ninja action!
Top
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

I cut the frame off behind the panhard mount and relocated the gas tank. The flat bed is taking shape and the roll bar is almost ready to tack in.

Image Image Image
Sneaky ninja action!
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Is there going to be anything more going back to the chassis where the roll cage meets the flat bed frame.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

Yup, but i ran out of steel i still need about 20 more feet of tubing just to finish the flatbed.
Sneaky ninja action!
Top
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

Update, Dual low ranges 4 speeds! 1.1:1, 1.92:1, 2.72:1, 5.22:1
Sneaky ninja action!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 24 guests