Plan to fitting a turbo to the td4.2 GQ sourcing all bits and pieces myself, have narrowed the top mount manifold and the 3 inch dump pipe down to either Turbo-glide or a Denco.
One is around a long weekends worth of petrol cheaper than the other.....having never seen either in real life, any idea which one should I choose?
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Top mount manifolds
Top mount manifolds
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
I have a denco one, and the flange is t3.
Only thing I dont like is the turbo is quite far back towards the firewall, so the dump pipe needed extra work to make up, and is closer to the firewall than I would like.
Not sure if the other option is any better.
cheers.
Only thing I dont like is the turbo is quite far back towards the firewall, so the dump pipe needed extra work to make up, and is closer to the firewall than I would like.
Not sure if the other option is any better.
cheers.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body
Need an interstate courier? http://www.transdirect.com.au
Need an interstate courier? http://www.transdirect.com.au
Actually I suspect it is T25 but cannot say for sure, I have 3 turbo here with external waste gates an they each seen to have differing stud distances, I should measure them again.
The one I am planing to use is from a 50f00 sr20,.
Thanks for the heads up on setback quadcam ,will look into that.
The one I am planing to use is from a 50f00 sr20,.
Thanks for the heads up on setback quadcam ,will look into that.
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
I have a denco with a disco patato on it, had to make an adapter up to go from t3 to t28 and i made my own 3'' dump. it does sit pretty close to the fire wall 2'' away but it doesnt get that hot. not that i can tell anyway, the paint isnt flaking off or anything or hasnt changed colour. has been on for about 3 months and is a daily driver.
Who is online
Users browsing this forum: No registered users and 2 guests