Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Top mount manifolds

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Top mount manifolds

Post by fnqcairns »

Plan to fitting a turbo to the td4.2 GQ sourcing all bits and pieces myself, have narrowed the top mount manifold and the 3 inch dump pipe down to either Turbo-glide or a Denco.

One is around a long weekends worth of petrol cheaper than the other.....having never seen either in real life, any idea which one should I choose?

thanks
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

what turbo are you running?

I believe the two manifolds have different flange patterns?

Denco being T3 and Turbo Glide being T25.

Thats saying Turbo Glide will supply one as more often then not they wont sell the manifold on its own, although they have been known too.
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

I have a denco one, and the flange is t3.

Only thing I dont like is the turbo is quite far back towards the firewall, so the dump pipe needed extra work to make up, and is closer to the firewall than I would like.

Not sure if the other option is any better.

cheers.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

Actually I suspect it is T25 but cannot say for sure, I have 3 turbo here with external waste gates an they each seen to have differing stud distances, I should measure them again.

The one I am planing to use is from a 50f00 sr20,.


Thanks for the heads up on setback quadcam ,will look into that.
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Posts: 27
Joined: Wed Nov 19, 2008 8:51 pm
Location: geelong

Post by sh1ty »

I have a denco with a disco patato on it, had to make an adapter up to go from t3 to t28 and i made my own 3'' dump. it does sit pretty close to the fire wall 2'' away but it doesnt get that hot. not that i can tell anyway, the paint isnt flaking off or anything or hasnt changed colour. has been on for about 3 months and is a daily driver.
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

Whats the deal with high mount?
Is there any real performance benefits over a low mount?
I guess they would be better for water and deep mud crossings though.
Top
Posts: 27
Joined: Wed Nov 19, 2008 8:51 pm
Location: geelong

Post by sh1ty »

Dont no about everyone else but i thought it would be just easier to work on. keep an eye on things and that
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests