Hey all,
When changing from an auto behind a 1FZFE to a manual, does the crossmember and tailshafts need to be changed? or are they the same.
Thanks
Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series man vs auto
Moderators: toaddog, Elmo, DUDELUX
80 series man vs auto
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Re: 80 series man vs auto
Not 100% on 80's gear, but I do know that when doing a 60 series auto to manual conversion, the tailshafts and crossmembers from the manual are needed. I'd imagine it'd be the same for the 80.killalux wrote:Hey all,
When changing from an auto behind a 1FZFE to a manual, does the crossmember and tailshafts need to be changed? or are they the same.
Thanks
Steve
Ok so would I be correct in saying that if I use the auto crossmember in the standard position(auto chassis) that the manual gearbox will be further forward? I am changing auto to manual.Red Rover wrote:different tailshafts. Manual shafts are longer.
different mounting position for the cross member.
Cross member is the same shape
Crossmember has to move backwards.
This would be great, As It would push my V8 further away from the firewall.
Thanks
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Steve, the crossmember of a manual bolts up snug behind the chassis mounts for the front lower suspension arms. The auto crossmember is roughly 100mm further back on the chassis. The crossmembers are not exactly thesame due to chassis widths etc....the auto itself is 100mm longer, so putting a manual in there will mean it is 100mm short of normal position....might be ok if a 100mm width adapter is used for the v8 bellhousing.....T700 would probably fit in there easier, or buy a manual set of shafts and crossmember. Its not impossible to move your crossmember forward, you need to cut off the mounts and maybe tap some holes...
Andrew
Andrew
Confucious say...man who argue with idiot, worserer himself
Who is online
Users browsing this forum: No registered users and 6 guests