Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series man vs auto

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

80 series man vs auto

Post by killalux »

Hey all,
When changing from an auto behind a 1FZFE to a manual, does the crossmember and tailshafts need to be changed? or are they the same.

Thanks
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 110
Joined: Tue May 17, 2005 9:23 pm
Location: ___

Re: 80 series man vs auto

Post by stumpyGU »

killalux wrote:Hey all,
When changing from an auto behind a 1FZFE to a manual, does the crossmember and tailshafts need to be changed? or are they the same.

Thanks
Steve
Not 100% on 80's gear, but I do know that when doing a 60 series auto to manual conversion, the tailshafts and crossmembers from the manual are needed. I'd imagine it'd be the same for the 80.
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

the tail shafts are definatly different. and im 99% sure the crossmember is the same mounting postion but is a different shape
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

different tailshafts. Manual shafts are longer.

different mounting position for the cross member.

Cross member is the same shape

Crossmember has to move backwards.
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

Red Rover wrote:different tailshafts. Manual shafts are longer.

different mounting position for the cross member.

Cross member is the same shape

Crossmember has to move backwards.
Ok so would I be correct in saying that if I use the auto crossmember in the standard position(auto chassis) that the manual gearbox will be further forward? I am changing auto to manual.

This would be great, As It would push my V8 further away from the firewall.

Thanks
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Steve, the crossmember of a manual bolts up snug behind the chassis mounts for the front lower suspension arms. The auto crossmember is roughly 100mm further back on the chassis. The crossmembers are not exactly thesame due to chassis widths etc....the auto itself is 100mm longer, so putting a manual in there will mean it is 100mm short of normal position....might be ok if a 100mm width adapter is used for the v8 bellhousing.....T700 would probably fit in there easier, or buy a manual set of shafts and crossmember. Its not impossible to move your crossmember forward, you need to cut off the mounts and maybe tap some holes...
Andrew
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

ok no worries, thanks for that andrew. Thats the info I needed.

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 37 guests