Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need help chasing a product/part.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Need help chasing a product/part.
Hi all, done a heap of searching but with no luck.Im chasing an aerial mount that you can pull out a pin and collapse it down,leaving it on the vehicle.I've seen somewhere but can't remember where(mag or dvd??).I was thinking of mounting it on my touring rack on passenger side to mount my sand flag when we do the simmo in june,folding down towards the rear when not in use.If anyone can put me in touch with this product or have links or pics i would greatly appriciate it.Thanks in advance
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Resident Terrorist
Try Andrews Comunications and ask for a fold over antenna mount.....
like this.........
or Ebay
http://cgi.ebay.com.au/Workman-EZ1-Fold ... 554wt_1167
like this.........
or Ebay
http://cgi.ebay.com.au/Workman-EZ1-Fold ... 554wt_1167
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
think it was GME that made a stainless whip arial that had it already built in, you could simply unscrew the small flange and it would fold down. they are a nice ariel and pretty cheap.
I used a bolt on mount on the bullbar for my big whips, left it loose enough to simply pull down so i could get it in and out of maccas drive throughs,etc.
Best bit was if you hit something likely to bust the whip, it would just move the mount rather than snap the arial
I used a bolt on mount on the bullbar for my big whips, left it loose enough to simply pull down so i could get it in and out of maccas drive throughs,etc.
Best bit was if you hit something likely to bust the whip, it would just move the mount rather than snap the arial
no answer at andrews comm,left a message.Rang pefab talked to old mate got some good info,just need to look at a few more before i make a decision.Anyone got any pics of what their running? cheers.
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Who is online
Users browsing this forum: No registered users and 0 guests