Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need help chasing a product/part.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Need help chasing a product/part.

Post by ANIMAL »

Hi all, done a heap of searching but with no luck.Im chasing an aerial mount that you can pull out a pin and collapse it down,leaving it on the vehicle.I've seen somewhere but can't remember where(mag or dvd??).I was thinking of mounting it on my touring rack on passenger side to mount my sand flag when we do the simmo in june,folding down towards the rear when not in use.If anyone can put me in touch with this product or have links or pics i would greatly appriciate it.Thanks in advance
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Post by Harb »

Try Andrews Comunications and ask for a fold over antenna mount.....

Image

like this.........

or Ebay

http://cgi.ebay.com.au/Workman-EZ1-Fold ... 554wt_1167
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Post by ANIMAL »

Thanks for the response, will follow all leads up.Will post up a pic when its all set-up
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

think it was GME that made a stainless whip arial that had it already built in, you could simply unscrew the small flange and it would fold down. they are a nice ariel and pretty cheap.

I used a bolt on mount on the bullbar for my big whips, left it loose enough to simply pull down so i could get it in and out of maccas drive throughs,etc.

Best bit was if you hit something likely to bust the whip, it would just move the mount rather than snap the arial
Posts: 270
Joined: Tue Jul 08, 2008 4:47 pm
Location: Burpengary.... Where the hell is that?

Post by Red Dog 4x4 »

Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Post by ANIMAL »

no answer at andrews comm,left a message.Rang pefab talked to old mate got some good info,just need to look at a few more before i make a decision.Anyone got any pics of what their running? cheers.
VRT...Viagra Racing Team - Just goes hard !
Lowmead 3 car challenge entrant 2011.
Gq extra cab.
12/2006 GU td6 Tourer.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest