Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
should i or shouldn't i? need help.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
should i or shouldn't i? need help.
my car has 33" tyres, 2" suspension lift, 2" body lift, and a tube bar. should i fill out the QLD DOT vehicle modification application form and put all this in it and see if they say ok. or will they just say NO because of the tyres and tube bar? cheers
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
oh my bad. its a 91 4runner. my car may or may not have been defected. im not sure yet as i wasnt the one driving the car so im not sure if i should waite to c if i get a defect notice in the mail and send the form in then or send it in now and run the risk of me not getting sent the defect notice but then the DOT dont like my car so i just make things worse for myself. cheers. i hope that made sence.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
haha yeh. more like a Farkin awsum front bar. cant waite to c it after the powdercote. very tops work. as for the fines. theres nothin much either of us could have done. im not gunna loose sleep over it hahaha
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
Probably right. What's on the tyre placard?grimbo wrote:which might be illegal too as they are illegal on Hiluxs in QLDMiddo wrote:ah k. looks like its 31's for me then. that sucks alot
Technically, 31s are too big for my Pajero (in Qld) but that's what I had on there when the body lift was inspected. I didn't draw attention to them, the inspectors didn't seem to mind.
If you take the vehicle in with 31s on don't mention it on the paperwork, and be polite and cooperative. Give them an excuse to dislike you and you'll need lots of personal lubricant.
i think its 205 on the tyre placard. realy hard to read but. i hav been driving my car around for more than a year on the sunny coast with 33's so im probably not gunna worry about it until i get told to change them. so far i havnt recieved a defect notice so i think im in the clear.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
Technically they are, same as 33s on a patrol/landcruiser, but they do usually let you get away with it unless you get an a-hole copper or give them a reason to pick themgrimbo wrote:which might be illegal too as they are illegal on Hiluxs in QLDMiddo wrote:ah k. looks like its 31's for me then. that sucks alot
If ignorance is bliss, then why aren't there more happy teenagers?
7.50R16 is smaller than a 33, closer to a 32. Off the top of my head they ar around 24-26mm bigger and in Qld you can go no more than 15mm bigger at the moment. As for the mod plate I'm unaware of any mod code relating to a tyre's size in Qld, but I do believe you about it being there as I saw it myself. It was prollie more to do with that size tyre was on it when the turbo was mod plated though. As I said though it is extremely rare to get defected for 33s on a patrol/cruiser, I guess its sorta unofficially legal.want33s wrote:Tyre placard in my GQ states:
7.50-16 or 33x10.5-15..
Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
If ignorance is bliss, then why aren't there more happy teenagers?
Find a tyre size calculator on the net, I use this one:tanz-e wrote:whats the exact legal upsizing? anyone know...
i think for a gq its 20% larger than production size???
how is legal and illegal calculated?
http://www.exploroz.com/vehicle/tyres/sizecalc.aspx
Type in your largest tyre size on your placard, it will give you an overall height.
Add 15mm to the tallest tyre height...Thats all you can go
Also 4WD vehicles can go 1.5 times wider on the tyre width as opposed to cars @ 1.3 times width. Off road passenger vehicles with solid beam axles (live) front and rear can increase wheel track by no more than 50mm and cars or car derivatives (IFS/IRS) can increase track by no more than 26mm.
Don't take life too seriously...it isn't permanent.
You don't get it do you.. .... The mod plate isn't for the tyres...Shadow wrote:If QLD transport see this mod plate, they will remove it from the vehicle on the spot.want33s wrote: Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
There is no mod code for tyre or wheel change, so the mod plate is worthless.
IT'S FOR THE TURBO... It just happens to have 33x12.5 written on it in the tyre size section.
The OP is about a Hilux/4Runner anyway... back to topic......
thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
I am no Hilux/4runner expert but I've heard that 30's are the largest legal tyre in QLD although you will probably get away with 31's without dramas...Middo wrote:thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
As far as large 31's you will want to look at American brands as they are nearly all over the stated size whereas Japanese etc are smaller than advertised.
ah ok. sweet deals. my 33's dont even look that big. im just stressing cause i dont want to loose any diff clearance hight as my IFSS (independant freakin stupid suspension) is already super close to the ground.want33s wrote:I am no Hilux/4runner expert but I've heard that 30's are the largest legal tyre in QLD although you will probably get away with 31's without dramas...Middo wrote:thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
As far as large 31's you will want to look at American brands as they are nearly all over the stated size whereas Japanese etc are smaller than advertised.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Tim
Who is online
Users browsing this forum: No registered users and 66 guests