Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

should i or shouldn't i? need help.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

should i or shouldn't i? need help.

Post by Middo »

my car has 33" tyres, 2" suspension lift, 2" body lift, and a tube bar. should i fill out the QLD DOT vehicle modification application form and put all this in it and see if they say ok. or will they just say NO because of the tyres and tube bar? cheers
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Depends on what car... 33's may or may not be ruled out.
2" susp..
2" body..
Tube bar..
All are approvable if fitted and built to comply with design rules etc.
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

oh my bad. its a 91 4runner. my car may or may not have been defected. im not sure yet as i wasnt the one driving the car so im not sure if i should waite to c if i get a defect notice in the mail and send the form in then or send it in now and run the risk of me not getting sent the defect notice but then the DOT dont like my car so i just make things worse for myself. cheers. i hope that made sence.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

I thought 33s were a no go for a 4Runner in Qld no matter what..?
This is not legal advice.
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Post by 5inchgq »

chimpboy wrote:I thought 33s were a no go for a 4Runner in Qld no matter what..?
AFAIK thats true
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

ah k. looks like its 31's for me then. that sucks alot
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

on the upside you have a cool tube bar now.

It really was bulls%$t the copper booking it like that.
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

haha yeh. more like a Farkin awsum front bar. cant waite to c it after the powdercote. very tops work. as for the fines. theres nothin much either of us could have done. im not gunna loose sleep over it hahaha
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Middo wrote:ah k. looks like its 31's for me then. that sucks alot
which might be illegal too as they are illegal on Hiluxs in QLD
Ransom note = demand + collage
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

grimbo wrote:
Middo wrote:ah k. looks like its 31's for me then. that sucks alot
which might be illegal too as they are illegal on Hiluxs in QLD
Probably right. What's on the tyre placard?

Technically, 31s are too big for my Pajero (in Qld) but that's what I had on there when the body lift was inspected. I didn't draw attention to them, the inspectors didn't seem to mind.

If you take the vehicle in with 31s on don't mention it on the paperwork, and be polite and cooperative. Give them an excuse to dislike you and you'll need lots of personal lubricant.
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

i think its 205 on the tyre placard. realy hard to read but. i hav been driving my car around for more than a year on the sunny coast with 33's so im probably not gunna worry about it until i get told to change them. so far i havnt recieved a defect notice so i think im in the clear.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

grimbo wrote:
Middo wrote:ah k. looks like its 31's for me then. that sucks alot
which might be illegal too as they are illegal on Hiluxs in QLD
Technically they are, same as 33s on a patrol/landcruiser, but they do usually let you get away with it unless you get an a-hole copper or give them a reason to pick them
If ignorance is bliss, then why aren't there more happy teenagers?
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Tyre placard in my GQ states:
7.50-16 or 33x10.5-15..
Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

oh realy. so 33's are legal on a GQ. dang. oh well. i only use mine for beach and easy to medium tracks anyway.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

want33s wrote:Tyre placard in my GQ states:
7.50-16 or 33x10.5-15..
Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
7.50R16 is smaller than a 33, closer to a 32. Off the top of my head they ar around 24-26mm bigger and in Qld you can go no more than 15mm bigger at the moment. As for the mod plate I'm unaware of any mod code relating to a tyre's size in Qld, but I do believe you about it being there as I saw it myself. It was prollie more to do with that size tyre was on it when the turbo was mod plated though. As I said though it is extremely rare to get defected for 33s on a patrol/cruiser, I guess its sorta unofficially legal.
If ignorance is bliss, then why aren't there more happy teenagers?
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

whats the exact legal upsizing? anyone know...
i think for a gq its 20% larger than production size???
how is legal and illegal calculated?
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

tanz-e wrote:whats the exact legal upsizing? anyone know...
i think for a gq its 20% larger than production size???
how is legal and illegal calculated?
Find a tyre size calculator on the net, I use this one:

http://www.exploroz.com/vehicle/tyres/sizecalc.aspx

Type in your largest tyre size on your placard, it will give you an overall height.

Add 15mm to the tallest tyre height...Thats all you can go :cry:

Also 4WD vehicles can go 1.5 times wider on the tyre width as opposed to cars @ 1.3 times width. Off road passenger vehicles with solid beam axles (live) front and rear can increase wheel track by no more than 50mm and cars or car derivatives (IFS/IRS) can increase track by no more than 26mm.
Don't take life too seriously...it isn't permanent.
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

tanz-e wrote:whats the exact legal upsizing? anyone know...
i think for a gq its 20% larger than production size???
how is legal and illegal calculated?
In Qld you can 15mm larger in diameter and 25mm smaller
If ignorance is bliss, then why aren't there more happy teenagers?
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

I think you will find on some, if not all cruisers that 33s fall into the legal catagory.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

want33s wrote: Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
If QLD transport see this mod plate, they will remove it from the vehicle on the spot.

There is no mod code for tyre or wheel change, so the mod plate is worthless.
03 HDJ100R GXL / 94 FJ45-80
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Shadow wrote:
want33s wrote: Mod plate in engine bay (fitted with turbo back in 97) says 33x12.5-15
If QLD transport see this mod plate, they will remove it from the vehicle on the spot.

There is no mod code for tyre or wheel change, so the mod plate is worthless.
You don't get it do you.. :roll: .... The mod plate isn't for the tyres...
IT'S FOR THE TURBO... It just happens to have 33x12.5 written on it in the tyre size section.

The OP is about a Hilux/4Runner anyway... back to topic...... ;)
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Middo wrote:thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
I am no Hilux/4runner expert but I've heard that 30's are the largest legal tyre in QLD although you will probably get away with 31's without dramas...
As far as large 31's you will want to look at American brands as they are nearly all over the stated size whereas Japanese etc are smaller than advertised.
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

make up your own tyre placard and stick it on :lol: :lol: LEGAL 40's cool
;)
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

want33s wrote:
Middo wrote:thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33
I am no Hilux/4runner expert but I've heard that 30's are the largest legal tyre in QLD although you will probably get away with 31's without dramas...
As far as large 31's you will want to look at American brands as they are nearly all over the stated size whereas Japanese etc are smaller than advertised.
ah ok. sweet deals. my 33's dont even look that big. im just stressing cause i dont want to loose any diff clearance hight as my IFSS (independant freakin stupid suspension) is already super close to the ground.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests