any help or suggestions on putting a coil chassis under my leaf leaf gq ute..
is it worth it??
does anyone have a chassis??
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
putting a coil chassis under my leaf gq ute...
hey mate...
me n a mate just did this conversion on his leafy... its pretty straight forward the only thing u gotta look out for r the front guards/quater panel n youll have to cut a hole in the inner guard for the front shock towers... the leaf ones r futher forward than the coil ones... coil steering colum is a bit shorter than the leaf so you will need a coil steering colum... ummm chassis is 305mm shorter or around that n the chassis rails are 100mm wider so u will need to mod the tray a bit... (and put tray mounts on if its a wagon chassis) and the plugs for the rear half of the wiring loom r different between coil n leaf so either re-wire or use a coil loom... everythin else is straight forward... all n all if ur happy with ur ute and all you r chasin is coils i reckon go for it...
goodluck... kirky
me n a mate just did this conversion on his leafy... its pretty straight forward the only thing u gotta look out for r the front guards/quater panel n youll have to cut a hole in the inner guard for the front shock towers... the leaf ones r futher forward than the coil ones... coil steering colum is a bit shorter than the leaf so you will need a coil steering colum... ummm chassis is 305mm shorter or around that n the chassis rails are 100mm wider so u will need to mod the tray a bit... (and put tray mounts on if its a wagon chassis) and the plugs for the rear half of the wiring loom r different between coil n leaf so either re-wire or use a coil loom... everythin else is straight forward... all n all if ur happy with ur ute and all you r chasin is coils i reckon go for it...
goodluck... kirky
Who is online
Users browsing this forum: No registered users and 124 guests