Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo Adapter for a 1HZ!
Moderators: toaddog, Elmo, DUDELUX
Turbo Adapter for a 1HZ!
Ordered a CT26-T25 adapter plate from Matt.McInnes, turns out I need a turbo exhaust manifold though!
After a chat with Matt and dropping my exhaust manifold in to him I have one of these on it's way.
An adapter plate from my 1HZ exhaust manifold to T25
Ill' let you know how it works out.
After a chat with Matt and dropping my exhaust manifold in to him I have one of these on it's way.
An adapter plate from my 1HZ exhaust manifold to T25
Ill' let you know how it works out.
Re: Turbo Adapter for a 1HZ!
All too happy to help.MADDS1 wrote:Ordered a CT26-T25 adapter plate from Matt.McInnes, turns out I need a turbo exhaust manifold though!
After a chat with Matt and dropping my exhaust manifold in to him I have one of these on it's way.
An adapter plate from my 1HZ exhaust manifold to T25
Ill' let you know how it works out.
1HZ Exhaust-T25
Regards Matt
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Ya that's what I thought, so I'd need a 3 hole 1HZ manifold to T3 adapter - do you make those Matt?
Thanks.
Louis
Thanks.
Louis
HZJ79, 1HZ turbo, intercooled, 36" SS TSL's, ARB air, ARB front locker, factory electric rear locker, Dual batteries, Dual fuse blocks, 8274,
Check out my videos: www.youtube.com/lshobie
Check out my videos: www.youtube.com/lshobie
Hey Per did your's finaly make through the ash cloudvn15 wrote:Answer on his behalf, T25 is not the same as T3, T25 is a bit smaller, I have bought both adapters from him, CT26-T3 and CT26-T25, quite a bit smaller the T25 when compared to T3lshobie wrote:Hi Matt, is the t25 the same as the t3 pattern, would that work for me?
Thanks,
Louis
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
It can be done but it would be more expensive as it needs 2 bolts similar to these for the T3- T25 Adapter.troopymad wrote:im still working out which turbo im using but can you do the t3 and t25 to the 3 stud 1hz manifold matt?
can i put my order in champ?
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
them bolts be freaky as!matt.mcinnes wrote:It can be done but it would be more expensive as it needs 2 bolts similar to these for the T3- T25 Adapter.troopymad wrote:im still working out which turbo im using but can you do the t3 and t25 to the 3 stud 1hz manifold matt?
can i put my order in champ?
hands and mums dont count!!!
If this one for MADDS works you can either spend $500 on a new exhaust flange to suit a turbo or one of these for $160.troopymad wrote:so ill get my turbo and just get the correct adapter from u and not stuff around - better idea?
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Came out pretty well, few minor modifications but on the whole should work well.bj on roids wrote:These things look great Matt.
Ordered an exhaust gasket from Toyota, also picked one up from the local exhaust shop but they seem a little on the small size diameter wise, the next size up a little too large. So I'm curious to see if a factory one fits better. The O/D was taken from the 1HZ exhaust flange, if the factory one is the same then I will adjust the O/D on the Toyota side and move the T25 a few mill more to the center. This will give that little bit more meat for the M8 studs. It will also be a better fit for the gasket.
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
As Hulsty says at Toyota turbo manifold comes with a CT26 flange so if you want to go to a Garrett you still need an adapter flange. Where as the 1HZ-T25 adapter negates the need to even remove the exhaust manifold.hulsty wrote:pLUS t25/t3 ADAPTOR
After market exhaust manifolds for the 1HZ may be T25/T3 already but not sure of the costs.
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Who is online
Users browsing this forum: No registered users and 0 guests