Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

high pinion conversion into ln106

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

high pinion conversion into ln106

Post by 83zook »

Hi all,
still getting some bits togther to do the swap, but just want to know if nitro gears or the trail gear 4.88's are better? as there's nearly $100 US dollars difference each, and can the aftermarket gear be fitted in the cruiser 8" centre and standard rear 8" with minimal fuss? will be using a solid pinion spacer also if that makes any difference.
Cheers Mitch
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Re: high pinion conversion into ln106

Post by Sic Lux »

From what i've seen on the net etc the nitro's are the strongest option out there. When you order just let them know ones for a hi pinion centre and ones for the low pinion setup as the hi pinion gears are reverse cut.
plenty of parts on the bench
Top
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Re: high pinion conversion into ln106

Post by 83zook »

yer reverse cut is the main reason im doing the swap, for strength and clearance..
So an aftermarket 4.88 will fit in both 8" centres ok?
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Re: high pinion conversion into ln106

Post by brad 93hilux »

will fit perfect... i have the same thing...
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Re: high pinion conversion into ln106

Post by 83zook »

thanks alot brad, did you need the multi-hole flange?
Cheers
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests