Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80series 4"lift + 36"et2 pics wanted

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

80series 4"lift + 36"et2 pics wanted

Post by udm »

Anybody got pics of 80series on 4" springs and 36" et2?

Just want to know if its a combination that dont work.
Ulises

www.OzSigns.com - 0400008422
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Re: 80series 4"lift + 36"et2 pics wanted

Post by Jeff80 »

Image

Image

Image

This my 80 on 35's with a 4 inch lift. From memory I had a 1inch spacer in at that stage as well, but have since removed it. There is plenty of room for 36's with just the 4 inch, no need for anything bigger.
" Some days you are the bug; some days you are the wind screen"
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Re: 80series 4"lift + 36"et2 pics wanted

Post by udm »

Always had the car on 6" springs, and got a set of 4" springs hanging around that i want to use now, so i was wondering if the 36" et2 i got would look weird on 4".
Ulises

www.OzSigns.com - 0400008422
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80series 4"lift + 36"et2 pics wanted

Post by 80's_delirious »

I had 35" MTZs on my 80 with 4" lift with no clearance problems.

Wheel offset will play a part. standard offset shouldnt cause any problems
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80series 4"lift + 36"et2 pics wanted

Post by ndog »

ull be sweet i have 35'' creepy crawlers on 2'' lift and only just scrubs at full flex
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80series 4"lift + 36"et2 pics wanted

Post by TheBigBoy »

4" lift and 35 muddies.

Image

You can run 15x10 steelies with a neg 44 offset (like in the pic) without any problems if you set up your panhard rod correctly with slightly off to 1 side. So both wheels tuck evenly.
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Re: 80series 4"lift + 36"et2 pics wanted

Post by zookimal »

3+2+36 Ullises. How's things mate?

Image
Image
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Re: 80series 4"lift + 36"et2 pics wanted

Post by udm »

Thanks guys for the effort, but i have already had 35" muddies before and know that they fit fine... its the 36" et2 which i am not convinced will fit well.

I think i am just going to start with the 4" springs and see how it goes.

This is how my previous cruiser sat with 6" + 36" et2, so i think small springs will only cause problems.
Image
Ulises

www.OzSigns.com - 0400008422
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Re: 80series 4"lift + 36"et2 pics wanted

Post by udm »

zookimal wrote:3+2+36 Ullises. How's things mate?
All good mate... finally found a new car to replace the red one. What have you been up to?
Ulises

www.OzSigns.com - 0400008422
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80series 4"lift + 36"et2 pics wanted

Post by TheBigBoy »

Different tyre brands are different sizes for the same branded size. Ive found simex to be smaller and their 36" to measure out to the same as the 35'"s I had previously.
Posts: 27
Joined: Sun Jan 31, 2010 8:49 pm
Location: Hatton Vale, QLd

Re: 80series 4"lift + 36"et2 pics wanted

Post by Triple B »

hey mate. I got three to four lift plus two in the body running 36/13/16 swampers tsl. prevously a had 35 maxis mudzilers and found they are a fair bit smaller. i've done nothing to my bumps stops and get very little scrub. have found a rock getting between the wheels and gaurd once. my biggest issue i have is hitting my exhaust both front and back in the wheel arch. I personaly wouldn't like to run them without body blocks but. i guess there is allways a way.

[IMG]http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff115.jpg[/IMG]
[IMG]http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff115.jpg[/IMG]
[IMG]http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff030.jpg[/IMG]




sorry not sure if the previouse pic will post, so these are a direct link to them.

http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff115.jpg
http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff030.jpg
http://i740.photobucket.com/albums/xx50/tripleb_racing/stuff081.jpg
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80series 4"lift + 36"et2 pics wanted

Post by 80's_delirious »

Triple B wrote: Image
Image
Image
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests